Sram

[Paul Maddox]

Dear all,

  Im trying to find some SRAM with seperate input and output pins (dual 
port?). I need 2 lots of 24Bits (so it could 6 4bit chips, 3 8bit chips,etc) 
by 16 byte (not a lot I know), anything bigger would work.

  Two problems I have found, most seems to be 32K (which is ok) but have 
seperate address lines for reading/writing and also seem to be PLCC, I would 
really like to stick with DIL, just so I can vero it easier.

  Anyhelp would be much appreciated.

  Paul Maddox


*******************************************************
*  Modulus synthesiser DIY Web Page ;-                *
*   http://www.xavax.com/modulus/                     *
*  E-Mail ;-                                          *
*   Space_banana at hotmail.com                          *
*******************************************************



______________________________________________________
Get Your Private, Free Email at http://www.hotmail.com