CV/audio mixer for modular idea

[John Blacet]

Here is an idea for a CV or audio mixer for modular application and I
would appreciate any feedback! 

Serge seems to have the most amazing variety of these modules, while
Doepfer has very little....

The mixer has two sections. The top section is 3 in, 1 out with +/-
control of each input (center off), so that the level and polarity (or
phase in the case of audio signals) can be controlled. A variable +/-5V
bias control is also present to add to the mix.

This is all DC coupled, of course.

The second section is a 1 in, 1 out version of the above.

LEDs would be present on all inputs to show levels.

I can see this in a 3U high by 1.5" W Blacet panel. Power supplies could
be in the +/-12 to +/-15V range.

Whatdyathink?

Regards.
-------------------------
John Blacet
Blacet Research Music Electronics
-------------------------
blacet at metro.net
http://metro.net/blacet/music.html