[DIY-PCB] New Mailing List

[Dave Halliday]

My thought's exactly - even if we aren't interested in a specific 
project, it would be fantastic to be able to read peoples thoughts on
why this chip instead of that chip, why this design, etc...

One less address in our register.





>     From: jh <jhaible at primus-online.de>
>     To: "'Roy Tate'" <roytate at ionet.net>
>     Date: Fri, 16 Apr 1999 01:20:22 +0200
>     Subject: RE: [DIY-PCB] New Mailing List
>      
>     Why split the list ?
>      
>     JH.
>      
>     -----Original Message-----
>     From:   Roy Tate [SMTP:roytate at ionet.net]
>     Sent:   Thursday, April 15, 1999 11:29 PM
>     To:     synth-diy
>     Subject:        [DIY-PCB] New Mailing List
>      
>     I have created a new mailing list on http://www.onelist.com
>     to avoid filling Synth-DIY with excessive traffic.  I will
>     still post to Synth-DIY on occcasion, especially when the
>     schematic, PCB or Panel designs are finalized.
>      
>     If you have already indicated interest in the Interpolating
>     Scanner, you will be receiving an invitation to join.  Otherwise
>     you can join by going to
>      
>     http://www.onelist.com/subscribe/DIY-PCB
>      
>     You will also have to register / create a profile with OneList.
>      
>     For the moment, the list is moderated, so expect some delays.
>     If anyone has file contributions, there is a shared files area
>     on OneList, and you can always send me files to put on the web.
>      
>     Regards,
>      
>     Roy Tate
>     roytate at ionet.net
>     http://www.ionet.net/~roytate
--- Via Silver Xpress V4.4 [Reg]