instruction

David Halliday (Volt Computer) a-davidh at microsoft.com
Thu Apr 8 21:37:19 CEST 1999


And don't forget list member Magnus Danielson's web site book list:

http://www.it.kth.se/~e93_mda/synths/books.html



-----Original Message-----
From: Rory McDonald [mailto:rmcdonald at viewtech.com]
Sent: Thursday, April 08, 1999 9:31 AM
To: synth-diy at mailhost.bpa.nl
Subject: RE: instruction


I have learned a lot by both reading this list and also by using some basic
books such as the radio shack (urrgh) Forrest Mims books (basic electronics,
engineers notebooks). I may get the ART of ELECTRONICS book that was
mentioned here-sounds good but $64.95!
I learned a lot just building the Paia kits too-there are lots of simple
mods for the Fatman available-see mods at www.paia.com
As far as patching ideas I have a set of 3 books Roland put out back in the
late 70's called THE SYNTHESIZER that has tons of patches for their system
100/700 series, but really relates to almost any analog modular synth. 
-RoryMcDonald

> -----Original Message-----
> From:	jdec at mindspring.com [SMTP:jdec at mindspring.com]
> Sent:	Wednesday, April 07, 1999 8:36 PM
> To:	carlray at MIT.EDU; synth-diy at mailhost.bpa.nl
> Subject:	Re: instruction
> 
> Goto, www.synthfool.com and look under the Schematics
> section and the DIY section....
> 
> Also, goto www.mindspring.com/~vco for lots of simple
> circuits....
> 
> Emjoy....
> 
> Jeff



More information about the Synth-diy mailing list