Another update

[Tony Clark]

   Well guys,  I've nearly finished moving (what a pain!).  Just before I 
started with the heavies I got my first VCO board finished and running.  
I tell you what, it's a great feeling to know that something didn't get 
kludged along the way!  Even so, there was a small insignificant problem 
to deal with, fortunately nothing that involved trace cutting!
   Anyway, hopefully as soon as I get stuff semi-unpacked, I'll pop this 
guy into the oven and do some frequency/temperature testing.  I will, of 
course, let you guys know of my successes or failures.
   Also, I've already had one person ask if these boards would be 
available for purchase.  To be honest, I doubt that anyone would really 
want to pay for these as my cost is fairly high.  I did not choose to use 
cheap parts.  Instead I went with high quality parts.  High quality = 
expensive.  While I haven't done a full cost analysis (I'm almost afraid 
to!), I imagine that I'd be looking at around $35-45 in just parts!
   However, if this doesn't scare you off...I will most likely have 5 or 
6 boards that would be available pre-assembled (no kits).  If you are 
interested, just send me a line and I'll keep you updated on my progress.
   In the meantime...it's back to moving.  :P

   Tony

------------------------------------,----------------------------------
I can't drive (my Moog) 55!         |     The E-Music DIY Archive
------------------------------------|  
Tony Clark -- clark at andrews.edu     | aupe.phys.andrews.edu/diy_archive
http://aupe.phys.andrews.edu/~clark |     Contributions welcomed!
------------------------------------'----------------------------------