Mixturtrautonium

[Dr. Jörg Schmitz]

>As far as I understand you have now introduced fixed frequency slave
>osc. which are hard synced by the master. 

The frequency is fixed, but can be programmed for example with
4 switches on the panel, representing the binary code of N.
You are right, it is some kind of hard sync.

>Will the amplitude of the
>slaves not deminish, if the master frequency rises? For every octave
>the slave output should go down by 0.5.  Or am I completely wrong ?

Yes. I looked over that. You are right.
After the mixer, i have to include a linear VCA, which is controlled by
the voltage corresponding to the master frequency (which should not
be so complicated, but its a bit nuisance.) 
Nevertheless, I think, this design is not too lavish.

>m.c.
j.s.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/ms-tnef
Size: 2293 bytes
Desc: not available
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/19980910/e3328ac8/attachment.bin>