AW: AW: VC delay module ideas?

[Haible Juergen]

	>The main thing that's stopped me doing this is that bbd's will
usually only
	>give you a couple of octaves range, unless there's a trick i'm
missing - i
	>guess you could use different taps for different octave ranges, but
no
	>smooth transition between the two.

I have not considered this. Don't know how they behave when clocked
below their spec'ed rate.

	>What about putting a VC all-pass filter in the feedback loop? Or
not
	>putting a filter in at all but some interesting nonlinearity. (I
guess my
	>interest is more in the noises that something like this would
produce - not
	>necessarily tuned tonal...)

All pass might be the exact contrary of what I'm looking for (;->) :
No HF damping, but the linear phase destroyed ...

Nonlinearity is great. I have retrofitted an Amdek delay with a
Vactrol based soft limiter, and I get evolving sounds over 
minutes and hours. (There should have been an example for this 
on the second YFTO tape - anybody heard from Barry lately ??)

JH.