AW: AW: EDS wasp schematics?

[Haible Juergen]

	>Perhaps I didn't explain myself very well.  The idea was to retain
the 
	>two 
	>oscillators (555s) but use the 8052 to replace the divider section.
	>Hence the 8052 not the 8051 - gives an extra counter/timer - one
for each
	>DCO and one to set the baud rate for the serial port midi.  Still
retains 
	>the
	>essential free-running fatness - just replace CMOS control & divide
with
	>a microcontroller.  The 4046 PLLs would come after the 8052, so the
glide
	>would add to the general free-for-all.

This makes perfect sense. Sorry for my overzealous reply !

JH.