Frontal Lobe Help?

[Heiko Bajus]

At 09:01 21.10.98 -0700, you wrote:
>I just aquired a Cannon Research Frontal Lobe unit for Korg synths.  I had
>intended to use it with its PCM adapter to download new PCM samples into
>my Wavestation AD.  But it doesn't seem to work on the AD.  The manual
>says it is for the M1, T series, and WS (wavestation).  And it had
>supposedly been run on a Wavestation EX some time ago with no problems. 
>It has the correct PCM card pinout but it says "No Connect", indicating
>that the midi communication isn't working right.  I've got everything
>enabled in the MIDI page of the AD so I'm tossing this out to the list -
>anyone familiar with this unit and/or perhaps if the Wavestation AD is not
>the same implementation as the regular Wavestation - perhaps resulting in
>my problem?  Anyone know anyone who may have worked at Cannon Research
>previously - they're gone now.  Sure would be cool to download my own PCM
>samples to the AD.....
>
>Barry 
>
>barry.l.klein at wdc.com
>


Hi Barry,
I have made the same experience. I noticed a bad contact of the pcm-channel
in the WS´s card-slot. Just stick some tape on the lower side of the
PCM-Connecter. That should help.

Heiko