PCB success!

[KA4HJH]

>I use an Unimat 3 with vertical attachment, but
>I'm sure any decent drill press will do. You can even hold the machine in
>your
>hand, but that usually results in pain in the wrist after a hundred holes
>or so.
>I don't doubt that a microscope could be helpful if your eyesight is reduced,
>but don't make the assumption that it is necessary for drilling boards.

My eyesight is terrible and I do just fine with my Unimat SL. Perfectly
aligned DIP holes. Once you get that first hole lined up...

Terry Bowman, KA4HJH
"The Mac Doctor"