DCO VCO and Hillary Clintons underwear!
Karl Helmer Torvmark
karlto at invalid.ed.ntnu.no
Fri Nov 6 16:44:12 CET 1998
On Fri, 6 Nov 1998, Paul Maddox wrote:
>
> agreed, if you could have "box" that did all the DSP stuff and had
> ouputs and inputs which could be configured to by CV/Gate/Audio then we
> would be getting close...
>
> The closest so far is the Nord Modular, DSP in a box... ok good idea,
> but down side...
> No CV out/In, No audio out/in, no gate out/in.. also why 2 octaves??
> duh?
I'm considering buying the cut down Nord MicroModular, and AFIK it has two
analog inputs, plus two audio outputs. The inputs can be routed ANYWHERE,
and so you can integrate it into your existing setup, but you're limited
to two signals out, two signals in of course. The MicroModular doesn't
have a keyboard, has four knobs, and only 1/4th the DSP power of the
ordinary one. It can play the same sounds as its big brother, but only
with 1/4th the polyphony. It is cheap, too.
---------
Karl H.
More information about the Synth-diy
mailing list