Tremolo

[DCMagnuson at aol.com]

In a message dated 11/5/98 5:36:28 AM Eastern Standard Time,
mozepy at earthlink.net writes:

> 
>  The schematic at (http://www.mindspring.com/~vco/effects/page_001.html)
>  says 300V. If you think it would work at a lower voltage I'm all for it.
>  I would greatly appreciate if you or anyone has a schematic for such a
>  supply.
>  
>  What about the 6 or 12 volts for the heaters? can that be part of the
>  same supply?
>  
>  I probably won't be working on this for a while. I would like to try the
>  solid state ones first, I havn't yet built anything that wasn't a kit.

Although it doesn't supply exactly 300V,  there's a tube circuit PS with a
parts list at Eddie Ciletti's website (EQ magazine).  It's for an Altec
Lansing preamp, supplies 235V for the plate voltage, and has allowances for
the tube heaters.  Should be easy enough to adapt to the tremelo circuit.  The
URL for the preamp is:

http://www.users.interport.net/~edaudio/tubes/altec.html

Hope it'll work

Dave Magnuson
Independent Music Site
http://members.aol.com/dcmagnuson