PAIA & kits - ametuer

[Curtin, Steven D (Steven)]

Another good place to start, it's where I started over twenty years ago, is
to buy a copy of Electronic Projects for Musicians by Craig Anderton and
build some kits from there.  The book contains instructions on soldering and
other practical matters.  Once you've built up a few fuzz boxes and got them
to work you should be able to tackle the Fatman.

-----------------------------------------------------------------
Steven Curtin  
Lucent Technologies Microelectronics
ph: (732)957-2996   fax: (732)957-6878
http://www.emf.org/subscribers/curtin/
sdcurtin at lucent.com
-----------------------------------------------------------------

> ----------
> From: 	matt wilson[SMTP:sebsi23 at hooked.net]
> Sent: 	Wednesday, November 04, 1998 6:12 PM
> To: 	jamos at technotoys.com; synth-diy at mailhost.bpa.nl
> Subject: 	Re: PAIA & kits - ametuer
> 
> At 06:40 AM 11/4/98 -0800, you wrote:
> 
> >I would advise anyone interested in getting into synth-DIY to start with
> a
> >Fatman; it's not too expensive, and very easy to build.
> 
> i would disagree, from a purely subjective POV. i found the fatman to be
> a very difficult undertaking as my first DIY project: