Moog Opus 3 Modification

[WeAreAs1 at aol.com]

In a message dated 11/2/98 11:05:26 AM, you wrote:

<<1) Build another 2 Mhz oscillator and mix it with the original - then send
the mixed signal through the "Top Octave Synthesizer"  and  "Keyer/Divider"
circuits.  This seams to me to be EASIER.

Yes, much easier.  Unfortunately, it won't work.

<<2) Build an additional Keyer/Divider board.  This would be HARD, but should
would work.>>

Yes, this is how it must be done.  Time to roll up your sleeves!