DCB switch box

[Christian Oncken]

This might be really obvious to you guys, but its worth pointing out.  

I built my own DCB cable for my juno-60.  One thing to keep in mind is that
the cable for has a send end and a recieve end... At least the one I built
does.  The cable is not wired directly:  1 to 1, 2 to 2, ect... the wires
are switched around.  If you build a switch box and use this same type of
cable both to and from the switch box, things might get screwy.  It might
be wise to construct a couple straight through cables to go from the
sequencers to the switch box, and then a DCB cable from the box to the
juno.  

I had a tough time finding the connectors too... so good luck finding all
that you will need.  

Christian Oncken