Maxx VCS - Changes

[Ken Stone]

Analog switches (multiplexers) 4051, 4052 and 4053 all have a third power
pin, Vee, designed to allow the device to be hung across a +/- supply while
still being controlled by +/0v logic. Alas, the mazimum voltage from Vdd(+)
to Vee(-) is still only the 15v maximum recommended.  Using these however,
may make the logic side of these circuits that much easier.

Ken

>A trick Oberheim used was to run it at +5 / -0.6. Moog never seemed to care
>about the audio and used +12 for 4016s and 4051s. On some of the later stuff
>they used +-5V for a few CV things.
>
>-Tom
>
>
>
_______________________________________________________________________
Ken Stone   sasami at blaze.net.au  
Catgirl Paradise <http://www.anime.net/~kens/>
Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>