Maxx VCS

[Ken Stone]

Have you had any problems with your cmos switches, exposing their
inputs/outputs directly to the outside world via the front panel sockets?
I'd be worried about them getting zapped with static.

Ken

>Added a voltage controlled switch.
>
>VCS-1A - Quad Voltage Controlled Switch
>
>I built this VC switch for the Mini1cv waveform select function but it worked
>so well I desided to make a Maxx module out of it. The VCS-1A is a quad
>voltaged selectable switch. CV can be 0 to +5 or 0 to +12/15 The four switches
>are turned on then off one at a time as the CV increases. Very usefull.
>
>http://www.tomg.vivid.net/maxx/page_027.html
>
>
>-Tom
>
>
_____________________________________________________________

                Ken Stone  sasami at blaze.net.au
                   ** Catgirl Paradise **
               <http://www.anime.net/~kens/>
         ** Australian Miniature Horses and ponies **
             <http://www.blaze.net.au/~sasami/>
_____________________________________________________________