Front Panels

[List, Christopher]

	Do you print the image in reverse and glue it image-side down,
or not?

	You don't have a problem with the laquer dissolving and smearing
the toner? I've had this problem with acryllic laquer and haven't used
it because the toner won't stay on the paper.

	- CLIst

> -----Original Message-----
> From:	Isac Georg Jensen [SMTP:bbl3749 at vip.cybercity.dk]
> Sent:	Saturday, May 30, 1998 6:14 AM
> To:	'synth-diy mail list'
> Subject:	Re: Front Panels
> 
> Instead of printing to plain paper and then laminate it, I print to
> transparancies because I like the 'raw' aluminum look. I've
> experimented
> with various types of spray adhesive, but it seems that no matter how
> hard I press the transparancies to the aluminum, the glue is not
> evenly
> distributed. This means that you can actually see the glue, which is
> kind of non-esthetic.
>