July 1998 Archives by date

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...

Starting: Wed Jul 1 00:38:02 CEST 1998
Ending: Fri Jul 31 23:22:24 CEST 1998
Messages: 486

• LM566CN VCO   Scott Gravenhorst
• VCA Modules   Mark Glinsky
• ETI-5600 Q's   Ken Stone
• Snare+ Kit   Lucas A Heckman
• ETI-5600 Q's   Jim Johnson
• [sdiy] The most unique ringmod you've ever seen!!   Sean-E
• LDR Properties   Martin Czech
• Jen SX-2000   Andrew Puls Q-Bot Eye
• EML-300 Sch.   media at mail1.nai.net
• Capacitor FAQ?   media at mail1.nai.net
• Adding a MIDI Thru   media at mail1.nai.net
• More MIDI stuff   media at mail1.nai.net
• ETI-5600 Q's   Paul Perry
• e*ectronotes replacements arrived   Paul Perry
• AW: LDR Properties   Haible Juergen
• ETI-5600 Q's   Jim Johnson
• ahhhhhhhhhhhhhhhhhh   JOSEPH S RAMSTROM
• Blacet Research News   John Blacet
• tube synths /VCA   Eric at Svetlana Electron Devices
• PAIA modules due in August   matt wilson
• LM566CN VCO   Rene Schmitz
• LM566CN VCO   Steve Morrison
• more frequency tracking..   Magnus Danielson
• OT: A diffrent fluid studio incident   Magnus Danielson
• O-scope question for you old EE's   Magnus Danielson
• ASM1 cap   Magnus Danielson
• tube synths /VCA   cyborg0 at GlobalEyes.net
• saw to tri to sine   Gur Milstein
• AW: more frequency tracking..   Haible Juergen
• Battery Backup for CMOS RAM   Joachim Verghese
• somewhat OT: OB problems   Andrew Schrock
• ETI-5600 Q's   Paul Perry
• tubesource for tubesynth   Bill Layer
• The Mix 606 Mods - scans of 2nd part of article available?   Sean Costello
• tube synths /VCA   Rene Schmitz
• 3 throw switches?   Don Tillman
• 3 throw switches?   mark verbos
• Gene Stopp's e-mail address   Magnus Danielson
• 3 throw switches?   Ken Stone
• VCO Control Voltages...   Magnus Danielson
• tube screens   Eric Barbour
• ETI-5600 Q's   Ken Stone
• Itsy Teenie Small Pots? (for 202 & 606 mods)   Sean Costello
• Itsy Teenie Small Pots? (for 202 & 606 mods)   Ken Balys
• 3 throw switches?   Ken Stone
• O-scope question for you old EE's   Merlin Zener
• AW: Itsy Teenie Small Pots? (for 202 & 606 mods)   Haible Juergen
• Itsy Teenie Small Pots?   Joachim Verghese
• Italian DIY synth   <<marjan>>
• AW: Serge Waveshaper was Re: Harmonics question   Haible Juergen
• More MIDI stuff   David Lee
• AW: more frequency tracking..   Magnus Danielson
• O-scope question for you old EE's   Magnus Danielson
• Drumstation V1 probs..   cyborg0 at GlobalEyes.net
• LM566CN VCO,PAIA modules due in August   honcho at paia.com
• Tubes with "numbers" inside them   Per.Mattsson at mkv.mh.se
• Tubes with "numbers" inside them   John Blacet
• Tubes with "numbers" inside them   Mark Glinsky
• Tubes with "numbers" inside them/nixie tubes   cyborg0 at GlobalEyes.net
• Tubes with "numbers" inside them   Don Tillman
• Tubes with "numbers" inside them   cyborg0 at GlobalEyes.net
• [Digital_Hell] Drumstation V1 probs..   Martin Selway
• Tubes with "numbers" inside them   Ken Stone
• Tubes with "numbers" inside them   Eric at Svetlana Electron Devices
• [sdiy] Doepfer Schematics   Sean-E
• front panels   ROBODON at aol.com
• Maxx VCO-3374A Addition   tomg
• Tubes with "numbers" inside them   Per.Mattsson at mkv.mh.se
• LM566CN VCO   tomg
• LM566CN VCO   tomg
• AW: AW: more frequency tracking..   Haible Juergen
• EML-200 parts   Bill Layer
• tubesource for tubesynths   Bill Layer
• LM566 VCO is alive   Rene Schmitz
• AW: AW: more frequency tracking..   Magnus Danielson
• Piezo thought..   RevTor at aol.com
• OB-8 Poly Modulation Mod schemos online   Haible Juergen
• inverting a voltage?   matt wilson
• 566 Schematic online   Rene Schmitz
• inverting a voltage?   media at mail1.nai.net
• inverting a voltage?   Scott Gravenhorst
• ETI-5600 Q's   Benjamin Woenig 9705146x
• ETI-5600 Q's   Benjamin Woenig 9705146x
• SynthDIY: Prophet 2000 for sale   Roger Arrick
• ASM1 Tempco need   Gur Milstein
• LM566 VCO is alive   Ingo Debus
• ETI-5600 Q's & PCB costs   Paul Perry
• EDP wasp conversion   Charles Moseley
• 3 throw switches?   Toby Paddock
• 566 Schematic online   Rene Schmitz
• LM566 VCO is alive   Rene Schmitz
• Nonlinear Oscillators?   Sean Costello
• ADV Cymbal   KA4HJH
• SERGE banana   Jeff Foster
• SERGE banana   matt wilson
• Nonlinear Oscillators?   Dan Slater
• Nonlinear Oscillators?   Paul Perry
• Nonlinear Oscillators?   Sean Costello
• Nonlinear Oscillators?   Dan Slater
• Nonlinear Oscillators?   Martin Czech
• SERGE banana   Gur Milstein
• 27c010 eprom blaster   The Dark force of dance
• Mini1cv Online (preliminary)   tomg
• LM566, IC8038, Fatman CVs   John Blacet
• scanning keyboards   Heiko van der Linden
• LM566, IC8038, Fatman CVs   Bill Layer
• LM566, IC8038, Fatman CVs   Paul Perry
• LM566, IC8038, Fatman CVs   Scott Bernardi
• Nonlinear Oscillators?   Jeff Foster
• LM566, IC8038, Fatman CVs   Bill Layer
• Fans and switched mode PSUs   Matthew S. Padden
• question about audio OP amp   Johan Persson
• question about audio OP amp   Andrew Schrock
• FMing of VCO   Eric Barbour
• Fans and switched mode PSUs   Ken Stone
• SERGE banana   bruce duncan
• question about audio OP amp   Scott Bernardi
• question about audio OP amp   Scott Gravenhorst
• question about audio OP amp   Andrew Schrock
• FMing of VCO   Jeff Foster
• CV-VCAs   Paul Perry
• question about audio OP amp   Scott Gravenhorst
• wasp (was: Re: [sdiy] Comparator = Opamp ??)   Sean-E
• AW: Nonlinear Oscillators?   Haible Juergen
• linear devices ?   Haible Juergen
• AW: Nonlinear Oscillators?   Kimmo Koli
• AW: question about audio OP amp   Haible Juergen
• AW: question about audio OP amp   Paul Perry
• ripple noise...   Johan Persson
• Chaotic Oscillators (over-blown flutes etc)   chordman at flash.net
• AW: question about audio OP amp   Scott Bernardi
• capacitor voltage ratings   Eric Barbour
• AW: question about audio OP amp   tomg
• tube nonlinearity   Eric Barbour
• Chaotic Oscillators (over-blown flutes etc)   KA4HJH
• CV-VCAs   Tatu Valli
• AW: question about audio OP amp   cyborg0 at GlobalEyes.net
• Posister???   Sean Costello
• ripple noise...in PAiA Fatperson   Paul Perry
• ripple noise...   Justin Case
• Chaotic Oscillators (over-blown flutes etc)   Hugo Haesaert
• FW: Chaotic Oscillators (Lorenz)   Toby Paddock
• OT, but anyway........   Chris Crosskey
• Kit Lovers take note   Paul Perry
• envelope generators   Thomas Hudson
• envelope generators   Ingo Debus
• 3-throw switches, octavation & tubesynth   Bill Layer
• tubes, transistors......   Eric Barbour
• Still in limp mode.   Paul Schreiber
• SH101 Bender unit   MiScherr at aol.com
• tubes, transistors......   Magnus Danielson
• MOTM 100 mod's   Gur Milstein
• Press_n_Peel laserprinter   Hugo Haesaert
• AW: tubes, transistors......   Haible Juergen
• Juno106 High Pass Filter Slider   Justin Case
• Thanks for, and question re: EML 300/301 Schemos   Bill Layer
• Sid Station   Larry Leitner
• Message not deliverable   Bill Layer
• New .mp3 track online...   Troy Sheets
• AW: tubes, transistors......   Jeff Foster
• motorised pots   Paul Perry
• AW: tubes, transistors......   Bill Layer
• tubes, transistors......   PapaJ59871 at aol.com
• motorised pots   Bill Layer
• AW: tubes, transistors......   Martin Keefe
• DSP anybody?   Martin Keefe
• Can a diode/transistor ladder filter be run from a single-ended power supply?   Sean Costello
• top octave chip   Deborah & Crystal
• "alternative controllers"   Deborah & Crystal
• Juno106 High Pass Filter Slider   Florian Anwander
• SH101 Bender unit   lev
• Can a diode/transistor ladder filter be run from a single-ended power supply?   R.G. Keen
• AW: tubes, transistors......   Ken Stone
• top octave chip   Ken Stone
• Can a diode/transistor ladder filter be run from a single-ended power supply?   cyborg0 at GlobalEyes.net
• final post: DEAD Nulogic sync24   Paul Perry
• DSP anybody?   Paul Perry
• "alternative controllers"   Paul Perry
• DSP: ADI-Dream?   Daniel Oberfeld
• AW: Can a diode/transistor ladder filter be run from a single-end ed power supply?   Haible Juergen
• [sdiy] Yet another analogue synth   Sean-E
• AW: motorised pots   Haible Juergen
• AW: tubes, transistors......   Haible Juergen
• re your web site   daniel8891 at yahoo.com
• DSP: ADI-Dream?   Daniel Oberfeld
• DSP anybody?   Martin Fay
• AW: motorised pots   Paul Perry
• Chua Oscillator question   chordman at flash.net
• DSP anybody?   Thomas Hudson
• Faceplate Lamination   List, Christopher
• DSP anybody?   Martin Keefe
• AW: DSP anybody?   Martin Keefe
• DSP: ADI-Dream?   Martin Keefe
• Can a diode/transistor ladder filter be run from a single-ended power supply?   R.G. Keen
• Faceplate Lamination   Andrew Schrock
• A Phase Modulation idea (was: Nonlinear Oscillators?)   Haible Juergen
• Can a diode/transistor ladder filter be run from a single-ended power supply?   chordman at flash.net
• Nonlinear vs. chaotic   Daniel Oberfeld
• AW: motorised pots   John Speth
• motorised pots   Tony Allgood
• motorised pots -Reply   Peter Wayman
• motorised pots   Mark Smart
• AW: tubes, transistors......   Magnus Danielson
• Can a diode/transistor ladder filter be run from a single-ended power supply?   Magnus Danielson
• More chua again   Scott Gravenhorst
• Nonlinear vs. chaotic   Ethan Duni
• AW: motorised pots   Paul Perry
• "alternative controllers"   Puentstein at aol.com
• More chua again   Johan Gustavsson
• EPROM PROGRAMMER   Heiko van der Linden
• Nonlinear vs. chaotic   Paul Perry
• AW: tubes, transistors......   Don Tillman
• AW: tubes, transistors......   Bill Layer
• Nonlinear vs. chaotic   Sean Costello
• Serge & Buchla Schematics available online   Sean Costello
• Steiner-Parker? Other diode filters?   Sean Costello
• EMS VCS3 Ring Modulator - how does it work?   Sean Costello
• Serge Waveshaper schemos on Music Machines   Jim Johnson
• EMS VCS3 Ring Modulator - how does it work?   <<marjan>>
• Steiner-Parker? Other diode filters?   <<marjan>>
• Steiner-Parker? Other diode filters?   Sean Costello
• Nonlinear vs. chaotic   Magnus Danielson
• Serge Waveshaper schemos on Music Machines   Dan Higdon
• EPROM PROGRAMMER   cyborg0 at GlobalEyes.net
• EMS VCS3 Ring Modulator - how does it work?   Magnus Danielson
• Serge Waveshaper schemos on Music Machines   Sean Costello
• motorised pots and other controls   Frank Lemieux
• VCS3 Filter Cap values   bruce duncan
• AW: motorised pots   Edward Leckie
• Serge Waveshaper schemos on Music Machines   Jim Johnson
• other controls aka capacitive plates   cyborg0 at GlobalEyes.net
• audio delay dispersion   Paul Perry
• EMS VCS3 Ring Modulator - how does it work?   Paul Perry
• Oberheim OB-X   Jeroen Bruintjes
• AW: EMS VCS3 Ring Modulator - how does it work?   Haible Juergen
• AW: VCS3 Filter Cap values   Haible Juergen
• DSP: ADI-Dream?   Hugo Haesaert
• AW: Steiner-Parker? Other diode filters?   Haible Juergen
• [sdiy] Soldering Saftey Tip Reminder   Sean-E
• AW: VCS3 Filter Cap values   <<marjan>>
• AW: AW: VCS3 Filter Cap values   Haible Juergen
• motorised pots and other controls   PapaJ59871 at aol.com
• new email addr   Bill Layer
• audio delay dispersion   Eli Brandt
• AW: Steiner-Parker? Other diode filters?   PapaJ59871 at aol.com
• Steiner-Parker filter schematics, anyone?   Sean Costello
• AW: AW: VCS3 Filter Cap values   <<marjan>>
• Serge Waveshaper schemos on Music Machines   tomg
• Serge Waveshaper schemos on Music Machines   Jim Johnson
• ring mod with the AD633   Jeff Foster
• AW: VCS3 Filter Cap values   Magnus Danielson
• ring mod with the AD633   List, Christopher
• ring mod with the AD633   Jeff Foster
• Serge Waveshaper schemos on Music Machines   tomg
• ring mod with the AD633   Paul Perry
• motorised pots and other controls   Ian Fritz
• How the $@#! does the Moog ladder filter do what it does?   J. L.
• Serge Waveshaper schemos on Music Machines   tomg
• making a pcb board.   if.then.else
• Dual transient generator   <<marjan>>
• Serge Waveshaper schemos on Music Machines   <<marjan>>
• Serge Waveshaper schemos on Music Machines   Scott Gravenhorst
• Serge Waveshaper schemos on Music Machines CORRECTION !!   Scott Gravenhorst
• ASM-1 Glide bipolar cap   tim0 (Timo Christ)
• Serge Waveshaper schemos on Music Machines   <<marjan>>
• Serge Waveshaper schemos on Music Machines   tomg
• FATMAN from PAIA   Erik Hecht
• How the $@#! do you FM mod a ladder filter?   cyborg0 at GlobalEyes.net
• How the $@#! do you FM mod a ladder filter?   Magnus Danielson
• Serge Waveshaper schemos on Music Machines   Jim Johnson
• Serge Waveshaper schemos on Music Machines   Scott Gravenhorst
• Dual transient generator   tomg
• How the $@#! does the Moog ladder filter do what it does?   tomg
• How the heck does the MS-50 filter WORK?   Sean Costello
• [sdiy] pitch quantizing   Sean-E
• How the heck does the MS-50 filter WORK?   <<marjan>>
• Dual transient generator   <<marjan>>
• AW: Steiner-Parker? Other diode filters?   Johan Gustavsson
• Random LFO...   Johan Persson
• Random LFO...   Paul Perry
• How the heck does the MS-50 filter WORK?   Sean Costello
• MIDI over long cable runs   WeAreAs1 at aol.com
• MIDI over long cable runs   Johan Persson
• How the heck does the MS-50 filter WORK?   <<marjan>>
• MIDI over long cable runs   Paul Perry
• MIDI over long cable runs   Cary Roberts
• MIDI over long cable runs   Arturo Mieussens
• MIDI over long cable runs   Dearnley, Luke
• over 30 modules analogue synth schematics   Stefano Maurri
• over 30 modules analogue synth schematics   Stefano Maurri
• AW: How the heck does the MS-50 filter WORK?   Haible Juergen
• MIDI over long cable runs   Per.Mattsson at mkv.mh.se
• Chaotic Oscillators (over-blown flutes etc)   Martin Czech
• anti-sync   Martin Czech
• Midi Hammond   Bill Layer
• cook book   Johan Gustavsson
• Midi Hammond   Larry Kirn
• MIDI for a Hammond   Eric Barbour
• cook book   Gur Milstein
• more ob matrix-1k q's   Andrew Schrock
• MIDI over long cable runs   Magnus Danielson
• Mini1 morphing to UMaxx 1OO   tomg
• MIDI for a Hammond   Mark Smart
• Random LFO...   matt wilson
• Random LFO...   Andrew Schrock
• Diode replacement   Isac Georg Jensen
• SH-1000 LFO   Johan Gustavsson
• MIDI over long cable runs   Jeremy Brookes
• SH-1000 LFO   Bill Layer
• motorised pots -Reply   Jeremy Brookes
• motorised pots   R.G. Keen
• matrix-1k FS   Andrew Schrock
• matrix-1k FS   R. Hess
• matrix-1k FS   Andrew Schrock
• motorised pots   Ken Stone
• New DIY VCO Maxx VCO-4A   tomg
• DIY VCO Maxx VCO-4A   tomg
• Nixie Tubes in Newsweek (!!!)   Don Tillman
• 76477 TI sound chips   John Blacet
• test - please ignore   Haible Juergen
• AW: Midi Hammond   Haible Juergen
• original and ingenious circuits ... (was: in How the heck does th e MS-50 filter WORK?)   Haible Juergen
• original and ingenious circuits ... (was: in How the heck does th e MS-50 filter WORK?)   Martin Czech
• original and ingenious circuits ...   Paul Perry
• original and ingenious circuits ... (was: in How the heck doe s the MS-50 filter WORK?)   List, Christopher
• Special Deal for the list   Kevin Colleran
• original and ingenious circuits ...   List, Christopher
• AW: Midi Hammond   Bill Layer
• tube VCF article   Eric Barbour
• more on tube VCF article   Eric Barbour
• original and ingenious circuits ...   Bright Boy
• original and ingenious circuits ...   tomg
• CEM CHIPS   george & lorraine
• ADV-Cymbal   Duane R Balvage
• tube VCF article   Ken Stone
• original and ingenious circuits ... (was: in How the heck does the MS-50 filter WORK?)   Magnus Danielson
• forthcoming review of paia midi2cv8   matt wilson
• synth diy archive   geoffery francis james
• Atari POKEY Sound Chip   Lucas A Heckman
• SH-1000 LFO   Paul Perry
• 74c150   jun at h-und-p.de
• AW: original and ingenious circuits ... (was: in How the heck doe s the MS-50 filter WORK?)   Haible Juergen
• 74c150   Ken Stone
• 74c150   List, Christopher
• 74c150   Paul Perry
• More Nonlinear   chordman at flash.net
• electric mistress   Luis Otero
• More Nonlinear filter feedback   Paul Perry
• More Nonlinear   Sean Costello
• More Nonlinear   Eric Barbour
• More Nonlinear filter feedback   Sean Costello
• Revised www site & LM1036 Audio Processor Module   List, Christopher
• electric mistress   tomg
• 74c150   tomg
• ADV-BASS   Gur Milstein
• un subscribe me   J20333 at aol.com
• original and ingenious circuits ... (was: in How the heck doe s the MS-50 filter WORK?)   mark verbos
• MIDI for a Hammond   Eric Barbour
• CEM memory loss!   george & lorraine
• MIDI for a Hammond   Bill Layer
• More Nonlinear   tomg
• FW: 74c150   List, Christopher
• More Nonlinear filter feedback   Paul Perry
• Serge TKB   JWBarlow at aol.com
• More Nonlinear   tomg
• More Nonlinear filter feedback   Scott Gravenhorst
• synth diy archive   Martin Czech
• 74c150   Hugo Haesaert
• AW: Midi Hammond   Robert Schrum
• MIDI for a Hammond   Robert Schrum
• midi controls   Eric Barbour
• WARNING **** LIST CRASH ****   Bill Layer
• WARNING **** LIST CRASH **** - Not Really   Tony Clark
• midi controls   Thomas Hudson
• electric mistress   tomg
• My list crash panic   Bill Layer
• SH-1000 LFO   Magnus Danielson
• SH-1000 LFO   Johan Gustavsson
• DIY Grab-bag for sale   Paul Schreiber
• AW: original and ingenious circuits ... (was: in How the heck does the MS-50 filter WORK?)   Magnus Danielson
• More Nonlinear   Magnus Danielson
• More Nonlinear   Scott Gravenhorst
• Electro Harmonix EFM Page   tomg
• Maxx VCO-4A   tomg
• Theremin   Paul Perry
• More Nonlinear   Sean Costello
• Analog-effects   Erik Hecht
• GIF of nonlinearity circuits I thought of   Scott Gravenhorst
• Fluid-based delay?   Mark Smart
• Threatening and Abusive Emails   Scott Gravenhorst
• Fluid-based delay?   JWBarlow at aol.com
• question about Ua726 and Japanese Urban music web site   Dragonser at aol.com
• PWM schematic   cmacdon at ix.netcom.com
• original and ingenious circuits ...   Florian Anwander
• More Nonlinear   Ethan Duni
• Fluid-based delay?   Ethan Duni
• Fluid-based delay?   Andrew Schrock
• psu question   Kristjan Varnik
• Finished at last....   Tony Allgood
• Rectifiers   Tony Allgood
• DIY grab box bid info   Paul Schreiber
• Minimoog VCF Problems.   Steven Cook
• Fluid-based delay?   Paul Perry
• Fluid-based delay?   WeAreAs1 at aol.com
• Revision to PWM schematic   cmacdon at ix.netcom.com
• HT-8955 audio delay chip   Paul Perry
• HT-8955 audio delay chip   Fraser, Colin J
• Software Synthesis   WARD Giles
• Software Synthesis   Thomas Hudson
• HT-8955 audio delay chip   WeAreAs1 at aol.com
• Fluid-based delay?   Florian Anwander
• WWW, Quantizer, & LM1036 Notes   List, Christopher
• new oscillator chips?   Troy Sheets
• SH-101 Mods   Yoshiki Ohmura (Yoshi)
• SH-101 Mods   Stupid Octave Cat
• Tube Bandpass   Ken Stone
• SH-101 Mods   Andrew Schrock
• tube VCF   Eric Barbour
• HT-8955 audio delay chip   Paul Perry
• Maxx VCF-5A MS5O clone   tomg
• Ring Modulators   Graham Wignall
• AW: Maxx VCF-5A MS5O clone   Haible Juergen
• AW: SH-1000 LFO   Haible Juergen
• MIDI to anything   Eric Barbour
• another (US) Schaeffer-Apparatebau report   Andrew Schrock
• Cover vinyl source?   John Speth
• Sub-Miniature Tube Type List   McIntosh, Malcolm
• another (US) Schaeffer-Apparatebau report   Jim Johnson
• Maxx VCF-5A MS5O clone   tomg
• Matching Diodes, & filter FM   Sean Costello
• Maxx VCF-5A MS5O clone   Sean Costello
• tube VCF   Ken Stone
• AW: Maxx VCF-5A MS5O clone   tomg
• AW: Maxx VCF-5A MS5O clone   tomg
• Dan Slater's Article in CMJ, and X to the kth power - how do you do it?   Sean Costello
• Cover vinyl source?   Dave
• MIDI to anything   J. Larry Hendry
• Cover vinyl source?   David Brown
• Dan Slater's Article in CMJ, and X to the kth power - how do you do it?   Dan Slater
• Dan Slater's Article in CMJ, and X to the kth power - how do you do it?   Martin Czech
• another (US) Schaeffer-Apparatebau report   Andrew Schrock
• Dan Slater's Article in CMJ, and X to the kth power - how do you do it?   Paul Perry
• NewBie Question: Trigger-To-MIDI DIY?   SteevCoco
• PC Hardware   Bill Layer
• please help with PSU :-((   tim0 (Timo Christ)
• NewBie Question: Trigger-To-MIDI DIY?   Eric Barbour
• Bad noise emissions and cleaning pots.   kayana at pacbell.net
• IBM PC Hardware   Bill Layer
• This is a long one.   Tony Allgood
• NewBie Question: Trigger-To-MIDI DIY?   Bill Layer
• NewBie Question: Trigger-To-MIDI DIY?   PapaJ59871 at aol.com
• Matching Diodes, & filter FM   R.G. Keen
• Matching Diodes, & filter FM   Steven Cook
• please help with PSU :-((   Tony Allgood
• please help with PSU :-((   tim0 (Timo Christ)
• (G-TECH) alias database as of 29-07-1998   mark verbos
• useful VCADSR's (was:This is a long one.)   Haible Juergen
• NewBie Question: Trigger-To-MIDI DIY?   SteevCoco
• PC Hardware prob. *SOLVED*   Bill Layer
• Cover vinyl source?   John Speth
• chorus pedal IC's   Arturo Mieussens
• useful VCADSR's (was:This is a long one.)   Tony Allgood
• Another Syntecno post... DIY?   cyborg0 at GlobalEyes.net
• VCO idea   9705146x
• chorus pedal IC's   Martin Czech
• VCO idea   Martin Czech
• VCO idea   Paul Perry
• PS3300   riccardo
• Another Syntecno post... DIY?   Fraser, Colin J
• VCO idea   PapaJ59871 at aol.com
• VCO idea   Philip
• VCO idea   Martin Czech
• VCO idea   Martin Czech
• AW: VCO idea   Haible Juergen
• chorus pedal IC's   Christian Hofmann
• AW: VCO idea   |[| Philip Pilgrim |]|
• AW: VCO idea and env   Martin Czech
• chorus pedal I.C.s   John Mart
• AW: AW: VCO idea and env   Haible Juergen
• VCO idea   9705146x
• chorus pedal I.C.s   Arturo Mieussens
• VCO idea   Bill Layer
• VCO idea   Jay
• VCO idea   steve.ridley at bbc.co.uk
• Vacuum Tube Circuit Books   McIntosh, Malcolm
• Hi everyboday   Arnaud GIRARD

Last message date: Fri Jul 31 23:22:24 CEST 1998
Archived on: Fri Apr 1 13:01:32 CEST 2022

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...