Power Supply help!

[mymoog at ix.netcom.com]

I hope the diagram comes out OK. I am wondering if the PS design is going
to be stable enough for the ASM1? 

                                              1         2
        |------|||         IN     +   |--|---|---|-------|--|----> out+
        |PRI  []|||--------|-------|--|  |   |   | 7815  |  |
   _    |     []||[]       |       |    +-  +-   |       |  - C3
 -| |--- 120v []||[]SEC    |  B1   |   C1- C2-   |----|--|  -
 -|_|--- 60Hz []||[]       |       |     |   |      3 |     |
        |     []|||--------|-------|--|  |   |        |     |
        |------|||         IN     -   |--|---|--------|-----|----> out-
                                                      |
                                                      G   
B1 - Diode Bridge (Full wave)
C1,C2 - 2000 uf 35v
7815 - 15v regulator
C3 - .1 uf

All caps are electrolytic above


Thanks 

David Lee