303 sequencer

[Karl ALEXANDRE]

	hi all,

	For the 303 sequencer i use the following : 

	- A note takes 6 clock pulses.
	- The gate is high between the rising edge of clock pulse 0 
	  and the falling edge of clock 3 (so 3.5 clock cycles).
	- The CV and accent are loaded in the latch and the D flip
	  flop by a rising edge of slide. Slide stay high for one
	  clock pulse whether there is a slide or not.
	- The slide stay high on note n+1 if note n is set to slide.
	
	Is it right ? What about the note duration and its timing 
	influence ?


				Karl.