AW: PSU design?

[Karl ALEXANDRE]

> 	Make sure that the currents that charge the capacitor
> 	don't cause voltage drops inside your regulation loop.
> 	That is, connect GND from transformer/rectifier to
> 	capacitor, and from *there* to your regulator GND
> 	connection, and then from *there* to the GND output.


> 	JH.

	Ok, i should have made a mistake. On my PCB there is a huge
	ground track in the middle. The two 723 are on each side of
	this big track, and their ground (also the voltage dividers
	ground) are connected on this big track, between the cap 
	ground and the output ground...
	

			Karl.