new comer

[Karl ALEXANDRE]

	hi,

	First i have to introduce myself (i did't do it :) ). I'm a PhD student in
	computer architecture, nothing to do with analog electronic, which i'm learning
	on the fly. I was mainly interrested in microprocessors, microcontrollers and
	all kind of numeric problems. But being passionated in music synthesis i wanted
	to build my own analog stuff, i started last year but nothing serious.

	Today i have a 303 clone ready analog et digital board, two eurocard, the analog
	being double sided. I also started a modular, i only have a few modules, some
	i designed, others from the tomg site. If interrested i have pcb ready for some
	tomg modules (it includes arp 2600 filter, ems diode ladder filter, 13600 vco with
	wave shaper). My own modules are an enveloppe generator using a 4051 instead of
	all those 4066 switch, a clone of the moog filter and it's vca, and a big noise
	generator (ala doepfer) including white, pink, roland x0x noises etc...

	All my pcb are fraction of euroboard, ie : they are one half or one third of it.
	the pot are soldered on it, and the pcb is attached to the faceplate by nothing
	else but the pot. It's crude but cheap. My problem is that the noise module have
	no pot :)

	Well I wish i can setup a web site to share my work.

	
					Karl