AW: MN3005, MN3007 BBD.. anyone built one?

[Haible Juergen]

	>The infinite delay is not practical realizeable without a kind of
	>compression. You could dial the feddback only close to infinity, on
one
	>side the signal would slowly fade, on the other it wold rise and
rise,
	>until total distortion/and or oscillation. I think it needs a jard
limiter
	>before the delay to get a real infinite delay without this
problems.

In case we're speaking of a digital delay, the switch often does
bypass the ADC / DAC and feeds the digital output into the 
loop again.
Works badly on the few PCM delays I have (there's always
a glitch), but used to work fine on the Delta Delay (you only
switch one tiny bit of an oversampled signal).

JH.