seeking dual linear concentric pots w/knobs

[Ken Stone]

I actually use these dual pots in my sequencer, using the outer for coarse
and the inner for fine tuning. The ones I have are fairly easy to move, so
if you aren't careful, adjusting one, you can mess up the other (stray
finger or whatever). The real problem with these is knobs - I don't have
any. The inner shaft uses 6mm splined, but the outer is just at tube with a
couple of slits (as per car radios).

Ken


>>Looking for dual linear pots with concentric knobs
>>That is, like a balance/vol knob on an old car radio,
>>not a stereo kind of thing.
>>I havn't put enough holes in an effect (suprise!)
>>and I dont want to do something really horrible like
>>have a knob change mode when half way around....
>>
>>paul perry melbourne australia
>>
>Hi Paul
>Now that's a DAMM good question.I have been looking for a source for these
>thing's for a while (i use a lot of test kit ,scopes,psu's)with these types
>of pot's and figured they would be cool for a sequencer layout(16 pot's in 8
>holes!!!).I even took a dual psu half to bit's one lunchtime,at work,to
>gleem some info but no joy!
>We may be enlightened!!!
>
>Live long and prosper
>
>George,Bath,uk
>
>
>
_____________________________________________________________

                Ken Stone  sasami at blaze.net.au
                   ** Catgirl Paradise **
               <http://www.anime.net/~kens/>
         ** Australian Miniature Horses and ponies **
             <http://www.blaze.net.au/~sasami/>
_____________________________________________________________