SAFE wall wart supplies

[Paul Schreiber]

John has a great small sized unit. For more ooommmph, see the MOTM-900 supply at:

www.synthtech.com

Several folks are using it for powering everything from old PAiA modules to an ARP 2600.

Paul Schreiber
Synthesis Technology


----------
From: 	cyborg0 at GlobalEyes.net[SMTP:cyborg0 at GlobalEyes.net]
Sent: 	Friday, August 14, 1998 1:57 AM
To: 	synth-diy
Subject: 	Re: SAFE wall wart supplies

John Blacet wrote:
> 
> The discussion of wall warts the past few days prompts me to mention the
> safe, fully enclosed and REGULATED wall wart system available from
> Blacet Research. While it may not be suitable for a large modular
> system, it is a very cool way to power up a small rack. Especially when
> you add the power distribution board!
> 
> Spend your time building cool modules and not power supplies (mostly
> pretty boring). :>
> 
I second this! I mean, these power supplys actually are probably CHEAPER
to buy from John than to build! And, they work great!!
I would say to buy the bigger of the two though...just in case you need
more current..can never have enough current..
Extremely stiff regulation with no ripple..
rob