spring reverb

[KA4HJH]

>i'm not so sure i understand what you mean by "outputs in series."
>this topic arrived in good timing as i have a volt controlled reverb on
>my bench half finished.
> i am very interested in combining reverb & chorus circuits somehow if
>anyone has any ideas.         happy synth fiddling,  crystal

I had this backwards. You take two reverb tanks. You wire the two send
transducers in parallel, out of phase. Then you wire the two receive
transducers in series which increases the signal level, lowering the
noise/hum.

Terry Bowman, KA4HJH
"The Mac Doctor"