spring reverb

[Crystal]

The trick is to take two springs, wire the inputs in parallel and
> the outputs in series OUT OF PHASE. This cancels most of the direct signal
> out, and most of the the "sproing" as well, leaving just the reverb. As
> long as you don't overdrive it, it sounds a lot like plate.
> 
> Terry Bowman, KA4HJH
> "The Mac Doctor"


hi Terry,
i'm not so sure i understand what you mean by "outputs in series."
this topic arrived in good timing as i have a volt controlled reverb on
my bench half finished.
 i am very interested in combining reverb & chorus circuits somehow if
anyone has any ideas.         happy synth fiddling,  crystal