Minimoog Vcf

[Sean Costello]

uzs159 at ibm.rhrz.uni-bonn.de wrote:

> In my attempt to build it from the schematic in this gif it didn't work
> either.
> I suspect there is a mistake in the diff amp. (Collector of one of the
> trannies is directly connected to +10V, this one heats up in my ckt)
> This "+10" seems not to be part of the original scan, but merely added
> later.
> So I would be thankfull if someone could give a few hints.

Hi:

The schematic in question is one that I scanned in.  There were some
components in error on the original schematic (as compared to other
schematics) which I corrected; I may have typed in a value that is
incorrect.  I'll look at my other Minimoog VCF schematics, and see where
the problem might lie.  I'll keep the list posted.

Sean Costello