Doepfer VCO

[Greg]

Hi all,
I just wondered if there was any way to get the pcb's and schems for
Doepfer modules... copies or originals from Doepfer... 

greg.

----------
> De : Tim Cockram <tim at redragon.demon.co.uk>
> A : synth-diy at mailhost.bpa.nl
> Objet : Doepfer VCO
> Date : mercredi 12 août 1998 09:55
> 
> Doepfer have the "service manual" for thier 110 vco on line@  
> 
> www.doepfer.de/a110_tec.htm
> 
> It's quite interesting.
> 
> The octave selection is clever (a bcd switch with 3 reference currents
> derived from R, R//R and R+R)
> 
> I bought a "RS Integrator" VCO which was claimed to be of higher quality
> but the circuitry (I drew the schematic before plugging it in, sad) IMO
> is not as good an engineering solution as the a110.  Having said that
> the Integrator vco does it's job.
> 
> May be I'm more engineer than musician but I do like multiturn presets
> for setting scaling etc.
> 
> Regards 
> 
> Tim
>   
> -- 
> Tim Cockram
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/19980812/56ed2503/attachment.htm>