AW: moog 905 spring reverb

[honcho at paia.com]

>>Very interesting idea !
>>Just to know if I got this right, you take two complete reverb 
>>*tanks*, each with 2 or 3 springs, and connect them together?


>Exactly. I forget who gets the credit for this one; it's either John
>Simonton or Craig Anderton. I don't have the info handy. Is it 
>archived at the PAiA site?
>>>

Credit where it's due, this is one of Craig's. It isn't at the site 
linked to anything but I did put up a quick and dirty schematic a 
while ago at www.paia.com/hotsp001.jpg . Apologies that time isn't 
available for something prettier but I'm deep in module land.

Note in particular, though, the reversal of polarity on the send 
transducer(s) on _one_ of the tanks and that the tanks _must_ be 
identical.

It's still in production, BTW, but is listed only in our print 
catalog. More details will make their way to the site one of these 
days - probably about the time all the stomp-boxes and so on do.

-JS

---------------------------------------------------------
John Simonton                  PAiA Electronics, Inc
3200 Teakwood Ln.              honcho at paia.com
Edmond OK 73013                http://www.paia.com
405-340-6300                   fax 405-340-6378