Anybody played with the LM1036?

[The Dark force of dance]

Y-ellow Y'all.
        I don't know about the ASM1 because I've not had time to follow it
up unfortunately. :( However...
At 08:05 PM 4/25/98 -0700, Adam M Bowen wrote:
>wouldn'n this be a good output module to the asm-1, at least as an
>external unit? in addition to pan, you get another vca & two vcfs
>(though crude). all for $3.68 (digikey). i don't really understand the
>concern about voltage requirements. couldn't you just run it from 0 to
>+15 instead of rail to rail? 

Isn't this just what I said. You can hang it from the positive rail in a
split system. The only thing to watch out for is that the VC is zero to Five
volts. And that the Bass, Treble and Balance controls are set centre when
it's at 2.5 volts. Having said that, it shouldn't be all that hard to
convert the rail to rail CV if necessary. It should be noted here. The real
beauty of using these chips in a mixer or output stage is that you can place
the chips right on the output stage. Your pots could be mounted several
meters away from the action if necessary.

Hope this helps

Be absolutely Icebox.
 _ __        _                              
| "_ \      | |         batzman at all-electric.com / aek at all-electric.com
| |_)/  __ _| |_ ____           ALL ELECTRIC KITCHEN               
|  _ \ / _` | __|___ |  The new AEK CD, Elementary Urban sanity    
| |_) | (_| | |_  / /   is out now on Transmission Communications from
|_,__/ \__,_|\__|/ /    http://brisbane.dialix.com.au:80/~com11
                / ,__   and check out http://www.all-electric.com
Goodfortune    |_____|       Let your SANITY wear thin.