SSM2044 Design
Bob Zimmer
bzimmer at voicenet.com
Thu Sep 11 07:52:52 CEST 1997
At 09:40 PM 9/6/97 +0100, you wrote:
>Hi FOlks,
>Does anyone know much about the SSM2044? I've got four of these chips
>and reckon that it'd be a good idea to come up with a circuit to match
>the rest of the Modulus gear using them but......
>Am I right in thinking the resonance is voltage controlled on this
>chip....from what I've got (a print-out of BJ's design and an old
>Maplin kit design) it seems to be.
>What is the range of CV's acceptable to the chip? is it rail to rail
>or 0-10V or 0-1V or what?
>What is the audio level acceptable to the chip?
>
>chrisc
Chris,
Here are the operating specifications:
Parameter Min Typ Max Units Conditions
Positive Supply Range +5 +15 +18 V
Negative Supply Range -5 -15 -18 V
Positive Supply Current 1.0 1.4 2.0 mA Vfc = GND
Negative Supply Current 4.5 6.2 8.0 mA Vfc = GND
Freq Control Range 10,000:1 50,000:1
Freq Control Feedthrough -- -36db -26db Vs+ = Vs- = GND
-90mV <= Vfc
<= +90mV
Output Offset Io/IoMax 0.05 0.2 Vs+ = Vs- =
Vfc = GND
Freq Control Offset f/fnom 0.6 1 1.5 Untrimmed
Q Control Input Impedance 675 900 1200 Ohm Vqc >= 0.7V
Q Current at Oscillation 450 500 550 uA -90mV <= Vfc
<= +90mV
Q Control Feedthrough -- -30db -20db
Q Control Threshold Voltage 400 500 mV
Max Avail Control Current 1.25 1.7 2.2 mA Vpin 13 = -120mV
Freq Control Input Range -120 -- +180 mV
Max Out Signal Current IoMax+-300 +-400 +-520 uA
Signal to Noise -- 70db -- RE: 30mVpp
(Pin 1 or 15)
Hope this helps!
>=== Bob Zimmer -- Phila, PA bzimmer at voicenet.com ===<
>=== http://www.voicenet.com/~bzimmer/ ===<
>=== "Oat-bran noise is more likely to be an issue in ===<
>=== situations where cereal data ia concerned [:-)]" ===<
>=== Analog Dialogue - Analog Devices ===<
More information about the Synth-diy
mailing list