MOTM Madness

[[22Hz] Productions]

On Wed, 10 Sep 1997, R.Fahl wrote:

> I have to say that I think this is not a good idea.  When working with
> exotic ICs, I always install them last, after I know that I've got the
> right voltages going to the right places.  For CEMs I always use machine
> tooled sockets.

	I agree 100% with Romeo... it's no more difficult to solder a 
socket and send the chip... but imagine the difficulty of replacing a 
3340 that blows due to bad assembly if it's pre-soldered vs. in a 
socket.. 

	JAson