rack constuction

[CGS2510.SEP.STUDENT.UCA at CUB.UCA.EDU]

> I've found this works quite well and I actually made my own rails from 3/8"
> x 3/4" x 20" pieces of solid aluminum designed for a 22" wide case. The
> Paia rails are a little flimsy - made from bent sheet metal - but mine are
> rock solid (wouldn't want to do it again, though - hand drilling and
> tapping of those 24 holes was a real drag - and you have to space them
> perfectly).

If you really need a strong rack I found that this extreme measure 
works very well.  I built a 24 space front plus 12 space angled top 
rack from small I-beams.  That's a whole lotta holes and a whole 
lotta tapping, but it sure is sturdy.