AW: MS-10 Mods

[Haible Juergen]

	>I came up with an idea, yet untried. To add a sub-oscillator, a
simple 
	>divide by 2 circuit is tacked onto the square wave output of
the oscillator 
	>and its output fed through the normalized contact of the
external input. So 
	>with nothing plugged into the external input jack, the external
signal pot 
	>would control the amount of sub-osc mixed in with the VCO
feeding into the 
	>filter. No drilling of the case or external changes required,
just a bit of 
	>veroboard and a couple of wires to the circuit board(s) and
panel.

I like the idea of doing mods without leaving marks on the 
outside. Kind of "micro invasive chirurgy" ...

JH.