Faceplates, follow up.

[Grant Richter]

> Much text deleted!...
> 
> There is yet another method that I've heard of, but have not tried.  The
> Press N Peel folks have told me that you can use their toner transfer
> material to make panel layouts as well as PC Boards.  Following a similar
> procedure, you would print your layout from a graphics package onto the
> Press N Peel(reversed of course!) and then simply iron (they gave no
> recommendations on time/temp) it onto the aluminum (or steel) panel.
> 

I tried that on 0.063 aluminum - no luck using a Laserjet 5L with microfine
toner. The transfer process is very picky about the TONER! I'm sure the
process works, but you have to have the right toner. The PNP people told me
that the older the Laserjet the better. They have had best results with the
Laserjet 2. A good reason to keep the old bombers around %^)