Midi-2-CV Problem

[Erik Schuijers]

Hi everyone at the new address,

I have a BIG problem with my PAiA Midi2CV8. I haven't really started
measuring but some indication of what might be wrong is always welcome.

The problem is that, sometimes all the outputs go to about 10 volts at once.
It then hangs at this voltage. Even after switching off/on it still hangs.
Sometimes though it works correctly again after switching off/on.

My first thoughts were: bad midi-recognition, but I've daisy-chained about
five other synths/modules after the Midi2CV8 and ALL OF THEM keep working
correctly; bad power supply, which might not be enough to feed the
uProcessor.

As I said I haven't done some real measuring yet. Has anyone else
encountered this problem and what (if there is one) is the solution?

Thanks!

Erik