Panel Sizes - results so far

[Ken Stone]

I've looked through all postings on panel sizes, and here are the results
and my thoughts on them.

Module Panel sizes gathered so far.

Digisound
  Panel 9x3 inches.  228 mm X 76 mm 
  PCBs are 160mm in length with widths varying from 50 to 120mm.

Roland System 100m
  Panel  104 mm wide 230 mm high
 199 mm deep 
 mounting centers 5 mm in from each end
 useable height of 205 mm allowing 2mm clearance to top and bottom of rack.

Moog modules
  Panel  2.125 inches wide and 8.75 inches tall. (or multiples)

Serge
 Panels are 7" tall by 17" wide.

Buchla 100 / 200 series
  Panels are
  7"x17"
  7"x8.5"
  7"x4.25"


Suggested sizes.

Height
  220mm / 8.6" high  ( 5 rack units high) - Very close to Moog 
  176mm / 6.9" high  ( 4 rack units high) - Very close to Buchla/Serge

Width. 
  Single unit 54mm / 2 1/8"  Compatible with Moog and Buchla (in pairs)

The size I am most likely to adopt is  220mm x 54mm 

Ken
_______________________________________________________________________
Ken Stone   sasami at blaze.net.au  
Catgirl Paradise <http://www.anime.net/~kens/>
Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>