Wurlie tricks
Don Tillman
don at till.com
Wed May 7 18:21:25 CEST 1997
From: Haible Juergen <Juergen.Haible at nbgm.siemens.de>
Date: Wed, 7 May 1997 13:00:16 +0100
The two halves of the pickup are connected by a little metal bow or
bridge, just in front of the part where the pedal comes in.
Yup, the 200 has that too.
Very few gain, but quite a lot of hum nevertheless!
Something seems broken. My 200 has only a small amount of hum, which
is pretty much swamped out by the hiss. Maybe the power supply?
Funny thing, btw: The *distortion* was most probably caused by a wrong
speaker! The previous owner had replaced a defective one by a 4Ohm
type.
The 200 has two 16 ohm speakers in parallel. Hmmm.
Another idea: With a split pickup you can subtract the signals to
cancel background hum.
-- Don "When I was young it seemed that life was so wonderful..."
More information about the Synth-diy
mailing list