Mega Electronics Quickmark material

[Chris Crosskey]

Hi people
I've got some more info about the Mega Electronics Quick-Mark 
labelling material. It is a two-part system, consisting of a 
double-sided self-adhesive base layer that is available in white, 
yellow, silver, and transparent vinyl and also 0.2mm aluminium. The 
top layer film is available in Black, dark blue, light blue, red, 
green white and brown. The system works equally with positive or 
negative artwork. You expose the imaging film to the artwork in a UV 
box, then take whichever side you need depending on whether the 
artwork was positive or negative, and laminate it to the self-adhesive 
base layer using a small amount of water. There's an over-laminate 
available as well, although as the colour layer is held between the 
base and the top-layer film anyway, the over-laminate is probably 
unnecessary for indoor applications.
Basically the prices are 45 UKP for the top film, except white which is 
65 UKP, and 25 UKP for the base layer. This is for a pack of of five 
sheets, approx 50cm by 30cm. 
Mega Electronics are on +44 (1223) 893900 and fax on +44 (1233) 
893894.
chrisc