Modulated waveform idea

[Kimmo Koli]

Well,
as I was reading the posts regarding different waveforms I came up with
this idea for a voltage controlled waveform generator:
- make two sub-oscillators with flip-flops using the pulse-width modulated
  VCO output:
	- first FF is rising edge triggered
        - second FF is falling edge triggered
- these two signals are the used to gate an other waveform
  (saw/triangle/sine...)  on or off and the resulting waveforms are summed
  or subtracted and various varying waveforms results  
- additional variation can be added by controlling the DC-level of the
  signal off situation.

All you should need is a dual CMOS FF, a 4066 and one or more opamps plus
the passive thuff to add two or three more pots to tweak.

Maybe somebody has tried this already...
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
   Kimmo Koli                         Helsinki University of Technology 
   kimmo at ecdl.hut.fi                  Electronic Circuit Design Laboratory
   http://www.ecdl.hut.fi/~kimmo      Otakaari 5 A 
   Tel:  +358 9 451 2273              FIN-02150 Espoo
   Fax:  +358 9 451 2269              Finland 
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=