centralized power supply
Lenox (Buck) Buchanan
lbuchanan at qualcomm.com
Mon Jun 9 23:00:35 CEST 1997
I'm a big fan of the centralized power supply trip however I'm also a
stickler for making sure each module has it's own regulators on board.
For the modular synth stuff I send +/-18VDC (bipolar) well filtered but
unregulated out to the modules. Each module re-regulates that down to
whatever it needs (usually +/- 15VDC). So far this has worked great and
I've never had a crosstalk problem between modules.
For guitar stuff I send +15VDC to all the pedals and each has a little
regulator board inside the battery compartment that regulates down to
whatever that pedal needs.
I was concerned with the guitar stuff especially that the additional ground
loops added with this method (that don't exist with separate wall warts or
batteries) would cause problems but so far they haven't. I'm still adding
stuff to both systems though so if anyone sees a major flaw in this
arrangement please let me know so I can prepare for it.
I don't have any lexicon or TBxxx stuff so I can't comment on the problems
people have had with those.
Take it easy,
Buck Buchanan x84377
Engineering Tech. - TGP dualband
"The junk merchant doesn't sell his product to the consumer, he sells the
consumer to the product. He does not improve and simplify his merchandise,
he degrades and simplfies the client." - William S. Burroughs, 1959
More information about the Synth-diy