AW: Heat-shrink question

[Haible Juergen]

	> My question is how to apply 
	> the heat and what kind of temperatures would be needed? The
coil is quite 
	> small, only about the width of a pencil.

Don't laugh: I use a candle. (the kind you use to keep your tea pot
warm at night ... green chinese Pai Mu Tan tea in my case most of the
time, but I disgress...)
Yes, the heat shrink tube *can* start to burn if you come too close
to the flame, but if you have done it a few times, it works pretty
well. Never bothered to buy one of these hot air devices.
(a hair dryer isn't hot enough, btw.)

JH.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/ms-tnef
Size: 1601 bytes
Desc: not available
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/19970729/56c56c60/attachment.bin>