ASM-1: Mat02 or LM394?

[Heiko Bajus]

Hello ASM-1 Builders

In the Modulus Edition 2 I read:

>The transistor pair can be simply two trannys,
>but they should be thermally bonded, or use a Mat02 (if you can find one),
>Or you could try the Elantec EN2016 (from Maplin), this is Four matched
2n3904's.
>Probably the best pair is the LM394.

Now I have already bought two Mat02 (no problem in Germany, about 9$ a
piece, is that too much?)
The LM394 is not mentioned in the assembly instructions Gene sent me with
the board. There he wrote the Mat02 is the best part.
May be these instructions are newer than the Modulus Article?
Shall I use the Mat02, or by the LM394 (5$ a piece)instead?

Regards Heiko