ASM-1 pictures on the web.

[Scott Morgan]

>>> My completed ASM-1 project:
>>>
>>> http://www.saturn5.com/tsheets/asm1/
>
>> Looks great Troy!
>>
>> Personally... I HATE doing front panel wiring... UGH!

<snip>

>2. If you're careful you can save wiring work for summing nodes (CV inputs,
>audio inputs to the filter, etc.) by leaving the resistors off of the PCB
>and "floating" them over the back of the faceplate. <snip>
then run just one wire to the PCB. 

This isn't such a great idea - you'll be prone to stray capacitance and a
few other electrical nasties by having your summing node spread out over a
large physical area. Rule of thumb is to keep summing nodes as small as
possible and as close to the input device as possible. 

On the other hand, you may get lucky and everything works just fine - my 02.

 _________ Scott Morgan __ Interval Music Systems ________
    interval at netcom.com    http://www.imuse.com