Cleaning out the house....

[Synthfool]

Hello DIY'ers

I'm in the process of cleaning out my service quarters and have some things
that may be of interest to a few of you guys. If you want anything, drop me
a line. Shipping and packing costs are not included and I will charge a fee
if it's difficult to pack or ship. Besides the stuff below, I have a ton of
misc electronic parts to get rid of for free.

The legend is as follows...

F= Free

B= Broken
U= Unknown condition
G= Good/Works
* = pretty sure it's good.


4 large analog meters that say "Nord" on them (good for a joke) $5,G
96 point TT patchbay used / wire wrap type  $20,U
A power supply removed from an Arp 2500 $10,U
Akai S900 sampler $125,B
Apple Teleport Bronze modem $20,G
Aries 300 power supply $10, U*
Arp 2600 sine converter sub board $10,U
Arp Odyssey black face, restored by me. VERY good condition $475,G
Cry Baby PCB's (3) $5ea, G
Digisound 80-10 voltage controlled env gen (completed PCB only) $50,U*
Digisound 80-10 voltage controlled env gen (front panel only) $15,G
Digisound Dual env gen $75, G
Digisound VCO front panel $15,G
Digisound waveform multiplier (completed PCB's only) $25,U*
Homemade 5" rackmount video monitor (B&W) for Roland samplers $25, G
Intel PC video boards (2) F,U
Jupiter 8 DCB interface PCB's $5/U*
Jupiter 8 MODCON pcb's (2) $35,ea
Jupiter 8 power supply board $20,G
Little synth board w/ 6 pots and a TI SN76477N  $20, U*
Mac 512K mother boards (2) F,B
Mac Performa 460 w/8 meg ram/80 meg HD $350 G
MANY misc parts and electronic junk  F,U
Moog 921A VCO driver pcb only $10,B (missing parts)
Moog 921B VCO pcb only $10,B (missing parts)
Moog modular model 909 power supply $10,U*
NEC 2V 2x external scsi CD Rom player $75, G
NEC 4x external scsi CD Rom player $50, U (needs caddy too)
NEC PC-8500 CPM "notebook" computer  $40, G (needs nicads)
Oberheim 4/8 voice power supply board  $10,G
Oberheim DPX-1 $10, (both disk drives and analog board are intact, though
missing SSM chips)
Oberheim SEM power supply boards (2)  $6 ea,G
Paia MV-8 enclosure F,G
Polyfusion (as 2 space Moog module) formant filter  $45,B
Polyfusion 2020 Low pass VCF (4 avail) $300ea, G
Polyfusion 2022 Hi pass VCF $300, G
Polyfusion 2040 16 channel sequencer with multicolored LED's  $425, G
Polyfusion 2048 Dual sample and hold $300,G
Polyfusion 2092 voltage quantizer $275,G
Polyfusion formant filter $300,G
Polyfusion raw PCB's & front panels (formant filters, VCA's, etc,etc) ??,G
Polymoog Faratron power supply F,B
Ppg Wave 2.2 modulation wheel section $20,G
Practical Peripherals 2400B modem $10, G
Prophet 5 bottom section w/power supply $20,G
Prophet 5 modulation wheel section $20,G
Roland Boss ROD-10 PCB only $15,U
Roland Juno-2 has voice problem, other wise ok  $250
Roland Juno106 MC5534A waveshapers (8 avail) $10ea/G
Roland Juno106 VCF/VCA IC's (10 avail) $10ea/G
Sony 17" RGB analog 1024x768 monitor $175,G
SSM 2050's (8 avail) $10ea,U
SSM2020 $10,U
SSM2030's w/o tempco's (3 avail) $12,U
SSM2030's w/tempco's (5 avail) $15,U
SSM2300's (4 avail) $10ea,U
Tau Systems dual VCA board $15,U*
Yamaha CS-80 synth $600 broken, $1000 working (has new vco's)
Yamaha SPX-90 front panel complete   F,G

Apple II stuff-
Apple ][+ clone $25,G
Apple Computer mouse interface board $10,U*
Hollywood Computers 16 chan A/D pcb (Burr-Brown ADC80 AGZ-12) $25,G
Decillionix 8 bit A/D/A sampling/playback board $40,U*
Grappler + printer card $10,U
Mountain computer music system w/light pen  $40,G
Passport designs soundchaser I/O board $5/U*
Rhodes Chroma interface board $25,U*
Roland RGB interface board F,U
Taxan Video 7 video board F,U*



Thanks for your time,

Kevin Lightner
http://synthfool.com