August 1997 Archives by author
Starting: Fri Aug 1 00:28:09 CEST 1997
Ending: Sun Aug 31 23:32:04 CEST 1997
Messages: 526
- Power Supplies?
J.G. Wong (Fiveman)
- Barry Klein book
J.G. Wong (Fiveman)
- Advice needed: MIDI router/switchers
Ian A. Vine (phone UK 0171-419-3450)
- Advice needed: MIDI router/switchers
Ian A. Vine (phone UK 0171-419-3450)
- Rack mounting
Ian A. Vine (phone UK 0171-419-3450)
- Advice needed: MIDI router/switchers
A.P.Hartley
- Superseque Schematics
A.P.Hartley
- Chase Bit 01
A.P.Hartley
- Transcendent Polysynth
Tony Allgood
- VCO or VCF
Tony Allgood
- Walsh Function Primer
Tony Allgood
- Circuits by MK Berry
Tony Allgood
- Re(2): Circuits by MK Berry
Tony Allgood
- MIDI routing AND Circuits by MK Berry
Tony Allgood
- Rack mounting
Tony Allgood
- EG design
Tony Allgood
- VCF design using OTAs
Tony Allgood
- LM324N
Tony Allgood
- LM13700 VCF (update)
Tony Allgood
- EG design
Tony Allgood
- Power Supplies?
Tony Allgood
- 'Analog' sequencer on PC?
Tony Allgood
- LM13700 VCF update no.2
Tony Allgood
- 'Analog' sequencer on PC?
Tony Allgood
- LM13700 VCF update no.2
Tony Allgood
- 'Analog' sequencer on PC?
Tony Allgood
- My adventures with the LM13700
Tony Allgood
- Making ground
Tony Allgood
- EM Mag & Analog
Mark Amundson
- Tom Henry did it Again - MIDI to Perc Trigger Kit
Mark Amundson
- Looking for parts
Lawrence Archard
- Mail to the UK
BJ
- PCB and Schenmtic Files.
BJ
- PC Schematic/PCB/Simulation FOR FREE!
BJ
- Nailed in the mail.....
BJ
- index-synth-diy
BJ
- 13 Dollars for an electronic switch ?? (was: 4066's. Eat em up, Yum)
BJ
- VCO
BJ
- BJ's disk tip
BJ
- BJ's disk tip
BJ
- VCO
BJ
- VCF design using OTAs
BJ
- VCO
BJ
- VCO
BJ
- EG design
BJ
- PCB sizes
BJ
- EG design
BJ
- Power Supplies?
BJ
- AW: Power Supplies?
BJ
- VCO
BJ
- Yes
BJ
- diode ladders
BJ
- Keyboard Mechanical Design
BJ
- Formant problems.
Heiko Bajus
- Tempco's
Duane R Balvage
- August electronic music. moog mods
Eric Barbour
- Finished a new module
Eric Barbour
- The schematic of my quad all-tube VCO
Eric Barbour
- cow boxes
Eric Barbour
- tube VCO
Eric Barbour
- Computer simulation of Dave's bumbling
Eric Barbour
- chips for sale
Eric Barbour
- AW: SCR VCO?
Eric Barbour
- Odyssey mods
Douglas A. Bohnstengel
- 'cheap' used 'scopes?
Terry Bowman
- 'cheap' used 'scopes? (boat anchors)
Terry Bowman
- 'cheap' used 'scopes?
Jeremy N Bradbeer
- EMS-style VCF
Jeremy N Bradbeer
- 'Analog' sequencer on PC?
Josh Brandt
- MiniMoog schematics
Jeroen Bruintjes
- tubes and synth circuits.
Eddie Burwell
- Front panel trimmers
Robert Campbell
- Front panel trimmers
Robert Campbell
- Keyboards
Robert Campbell
- Unisyn 1.2 Opinions
Stupid Octave Cat
- Prophet parts
Tony Clark
- L.E.D.'s
Tony Clark
- Mail to the UK
Tony Clark
- Prophet T8
Tony Clark
- PC Schematic/PCB/Simulation FOR FREE!
Tony Clark
- A digital analog sequencer.
Tony Clark
- 13 Dollars for an electronic switch ??
Tony Clark
- VCO
Tony Clark
- AW: SCR VCO?
Tim Cockram
- 13 Dollars for an electronic switch ?? (was: 4066's. Eat em up, Yum)
Tim Cockram
- Alternative Controllers
Tim Cockram
- optocouplers for VCAs?
Tim Cockram
- Barry Klein book
Tim Cockram
- ARP VCF
Tim Cockram
- US Patents
Tim Cockram
- tube VCO / VISIO Software
David Halliday (Volt Computer)
- 'cheap' used 'scopes?
David Halliday (Volt Computer)
- Scented ICs
David Halliday (Volt Computer)
- optocouplers for VCAs?
David Halliday (Volt Computer)
- optocouplers for VCAs?
David Halliday (Volt Computer)
- Keyboard Mechanical Design
David Halliday (Volt Computer)
- 'Analog' sequencer on PC?
David Halliday (Volt Computer)
- Power Supplies?
David Halliday (Volt Computer)
- ARP VCFs...anyone printed them?
David Halliday (Volt Computer)
- MS-50 Filter & VCA Schematics Online
Sean Costello
- Why did I get this mail?
Sean Costello
- Sorry for earlier bandwidth hogging
Sean Costello
- Korg PS-3100 Resonator Schematics Online
Sean Costello
- Through-zero FM of audio signals (was: Module mania!!!)
Sean Costello
- Need a minor favour.....
Chris Crosskey
- Mail to the UK
Chris Crosskey
- Nailed in the mail.....
Chris Crosskey
- Attn: UK DIY-ers looking for a multi-meter....
Chris Crosskey
- More Modulus Panels and design news....
Chris Crosskey
- Hello
Steven Curtin
- 4066's
Steven Curtin
- scented ICs
Steven Curtin
- No PAiA EKx
Steven Curtin
- Alternative Controllers
Steven Curtin
- 4066's. Eat em up, Yum
Steven Curtin
- Buchla 200 User Manual
Steven Curtin
- optocouplers for VCAs?
Steven Curtin
- VCO
Steven Curtin
- EG design
Steven Curtin
- EG design
Steven Curtin
- Power Supplies?
Steven Curtin
- 'Analog' sequencer on PC?
Steven Curtin
- SSB
Martin Czech
- SSB
Martin Czech
- L.E.D.'s
Martin Czech
- national app notes
Martin Czech
- fast rectifier
Martin Czech
- AW: fast rectifier
Martin Czech
- national app notes II
Martin Czech
- fast rectifier
Martin Czech
- fast rectifier
Martin Czech
- Moog ladder filter vs Wah Wah pedal filter
Martin Czech
- fast rectifier
Martin Czech
- Power Supplies?
Martin Czech
- Power Supplies?
Martin Czech
- EG design
Martin Czech
- diode ladders
Martin Czech
- MS50 LP-Filter
Martin Czech
- Three phase sine generator in Elrad
Ingo Debus
- Looking for parts
Ingo Debus
- AW: Ringmod transformers
Ingo Debus
- PCB sizes
Ingo Debus
- Zendrum?
Ingo Debus
- Our Name In Lights...... (??)
Ingo Debus
- Polyfusion LFO 2003 FS and kits
Jeff R. Dec
- index request
Don Duval
- PCC
Robert Edgar
- Eric's Tube Synth
Robert Edgar
- August electronic music. moog mods
Dempsey Elks
- Scented ICs
Patrik Erikson
- Live Gig in Portland, OR, USA
Bill Felton
- Microprocessors used in analogue gear?
Henry J. Fok
- Eric's Tube Synth
Doug Forbes
- Confused! How do OTAs control resonance in DG80-7 VCF?
Colin Fraser
- AW: Weird Envelopes??? [was
Colin Fraser
- Goodbye...
Colin Fraser
- Keyboards
Fraser, Colin J
- August electronic music. moog mods
Quinton Fulsom
- August electronic music. moog mods
Quinton Fulsom
- Prophet T8 and other s.c. keys with probs.
Quinton Fulsom
- Computer simulation of analog synthesis in general and Dave's biz bumbling
Quinton Fulsom
- ARP VCFs...anyone printed them?
Pierre G
- Solina
Kevin Gale
- L.E.D.'s
Garrett
- moog source mods
Pat Gay
- L.E.D.'s
John Greczula
- Thanks! & LED Failure Rate
John Greczula
- Maestro Rhythm King
John Greczula
- Rack mounting
John Greczula
- Tiny illuminated pushbuttons
John Greczula
- Unisyn 1.2 Opinions
Joe Grisso
- Keyboard Mechanical Design
Joe Grisso
- Se:Re: Keyboard Mechanical Design
prof. Antonio Guerrieri
- Se: avoiding Mylar caps: isn't it???
prof. Antonio Guerrieri
- AW: Transcendent Polysynth
Peter Haaf
- VISIO - layout program
Dave Halliday
- New sequencer trix
Dave Halliday
- audience participation controls
Dave Halliday
- audience participation controls
Dave Halliday
- audience participation cont
Dave Halliday
- audience participation II
Dave Halliday
- Alternative Controllers
Dave Halliday
- Ringmod transformers
Dave Halliday
- Our Name In Lights...... (??)
Dave Halliday
- disolving potted modules
Dave Halliday
- Power Supplies?
Mikko Helin
- JUNO106 or 60 pitch bender
Larry Hendry
- Advice needed: MIDI router/switchers
Larry Hendry
- The schematic of my quad all-tube VCO
Dan Higdon
- Bathroom shelves, was Re: Analogue Sequencers
Rich Holmes
- Bathroom shelves, was Re: Analogue Sequencers
Tomy Hudson
- UK Vactrol distributor
Rob Hukin
- IMPORTANT LIST ADMIN INFO
Rick Jansen
- VCO or VCF
Neil Johnson
- Walsh Function Primer
Neil Johnson
- Walsh Function Primer
Neil Johnson
- PC Schematic/PCB/Simulation FOR FREE!
Neil Johnson
- PC Schematic/PCB/Simulation FOR FREE!
Neil Johnson
- Rack mounting
Neil Johnson
- AW: Transcendent Polysynth
Haible Juergen
- AW: Walsh Function Primer
Haible Juergen
- AW: Confused! How do OTAs control resonance in DG80-7 VCF?
Haible Juergen
- AW: Weird Envelopes??? [was RE: CS-80]
Haible Juergen
- AW: Weird Envelopes??? [was RE: CS-80]
Haible Juergen
- AW: fast rectifier
Haible Juergen
- AW: SSM 2033
Haible Juergen
- AW: PC Schematic/PCB/Simulation FOR FREE!
Haible Juergen
- maybe this is the solution for constant beat rate detuning ...
Haible Juergen
- AW: SCR VCO?
Haible Juergen
- linear detuning works !
Haible Juergen
- 4066's. Eat em up, Yum
Haible Juergen
- AW: AW: SCR VCO?
Haible Juergen
- AW: linear detuning works !
Haible Juergen
- AW: Formant problems.
Haible Juergen
- 13 Dollars for an electronic switch ?? (was: 4066's. Eat em up, Y um)
Haible Juergen
- AW: 13 Dollars for an electronic switch ?? (was: 4066's. Eat em u p, Yum)
Haible Juergen
- AW: 13 Dollars for an electronic switch ?? (was: 4066's. Eat em up, Yum)
Haible Juergen
- More about switching
Haible Juergen
- AW: More about switching
Haible Juergen
- AW: Korg PS-3100 Resonator Schematics Online
Haible Juergen
- AW: Through-zero FM of audio signals (was: Module mania!!!)
Haible Juergen
- An idea for replacing tempco resistors ??
Haible Juergen
- AW: Ringmod transformers
Haible Juergen
- AW: LM13700 VCF (update)
Haible Juergen
- AW: EG design
Haible Juergen
- AW: EG design
Haible Juergen
- 2nd board of freq shifter finished
Haible Juergen
- AW: Power Supplies?
Haible Juergen
- AW: LM13700 VCF update no.2
Haible Juergen
- AW: EG design
Haible Juergen
- AW: EG design
Haible Juergen
- AW: LM13700 VCF update no.2
Haible Juergen
- AW: Hot LM13700 ?
Haible Juergen
- AW: diode ladders
Haible Juergen
- AW: MS50 LP-Filter
Haible Juergen
- FS:EMS Spectre video synthesizer
Tony Kalomiris
- More EMS Spectre Info
Tony Kalomiris
- EMS Spectre SOLD !!!
Tony Kalomiris
- Formant problems.
Henri Kovalainen
- OSCar
Henning Kristiansen
- Unisyn 1.2 Opinions
Dave Kurz
- Alternative Controllers
Rowena Larkins
- Keyboard Mechanical Design
Rowena Larkins
- VISIO
Julian Leviston
- VISIO
Julian Leviston
- PCB sizes
Niklas Lindberg
- PCB sizes
Niklas Lindberg
- analog seq circut
Paul Maddox
- PPG wavetable module,
Paul Maddox
- ARP VCF Postscript Files
Charles A. Mann
- More EMS Spectre Info
Caeilite McCabe
- Scented ICs
J.D. McEachin
- Analogue Sequencers
J.D. McEachin
- Analogue Sequencers
J.D. McEachin
- AW: Ringmod transformers
Damien Moody
- Microprocessors used in analogue gear?
Ed Moore
- Microprocessors used in analogue gear?
Ed Moore
- Microprocessors used in analogue gear?
Ed Moore
- Microprocessors used in analogue gear?
Ed Moore
- A digital analog sequencer.
Joey Nelson
- Keyboard Mechanical Design
Mike Nichols
- EG design
John P
- Happiness is an SSM2040 VCF...
Matthew S. Padden
- Confused! How do OTAs control resonance in DG80-7 VCF?
Matthew S. Padden
- Not as confused now...(resonance and OTAs)
Matthew S. Padden
- Mail to the UK
Matthew S. Padden
- Mail to the UK
Matthew S. Padden
- Mail to the UK
Matthew S. Padden
- analog seq circut
Matthew S. Padden
- Moog ladder filter vs Wah Wah pedal filter
Matthew S. Padden
- Musico Resynator
Matthew S. Padden
- Scented ICs
Matthew S. Padden
- Akai Patchbays
Matthew S. Padden
- Vactrols for Korg PS-3100 resonator
Matthew S. Padden
- Mic preamps...
Matthew S. Padden
- Blacett frequency divider
Matthew S. Padden
- Power Supplies?
Matthew S. Padden
- neon-lamp synth in .bmp format
Matthew S. Padden
- ARP VCFs...anyone printed them?
Matthew S. Padden
- FW: Nuts and Volts Magazine
Paddock, Toby
- AW: Weird Envelopes??? [was RE: CS-80]
Mike Peake
- multiplier chips (was SSB)
Paul Perry
- August electronic music. moog mods
Paul Perry
- Circuits by MK Berry
Paul Perry
- 13 Dollars for an electronic switch ?? (was: 4066's. Eat em up, Yum)
Paul Perry
- More about switching
Paul Perry
- audience participation controls
Paul Perry
- Vactrols for Korg PS-3100 resonator
Paul Perry
- BJ's disk tip
Paul Perry
- BJ's VCO quest
Paul Perry
- Ringmod transformers
Paul Perry
- Analogue Sequencers
Paul Perry
- Power Supplies?
Paul Perry
- Scented ICs
[22Hz] Productions
- Live Gig in Portland, OR, USA et al...
[22Hz] Productions
- Ringmod transformers
[22Hz] Productions
- Ringmod transformers
[22Hz] Productions
- AW: Ringmod transformers
[22Hz] Productions
- LM324N
[22Hz] Productions
- LM324N
[22Hz] Productions
- Making ground
[22Hz] Productions
- VCO or VCF
Mark Pulver
- Odyssey mods
Mark Pulver
- Apple ][ Grab Box - You pay shipping
Mark Pulver
- Grab Box II - Alpha Syntauri
Mark Pulver
- serge
Mark Pulver
- Starting an ASM-1 Trouble-shooting page. [without HTML]
Mark Pulver
- Starting an ASM-1 Trouble-shooting page. [without HTML]
Mark Pulver
- MiniMoog schematics
Mark Pulver
- Alpha Syntauri - GONE
Mark Pulver
- Mail to the UK
Mark Pulver
- VISIO
Mark Pulver
- Unisyn 1.2 Opinions
Mark Pulver
- Nailed in the mail.....
Mark Pulver
- Unisyn 1.2 Opinions
Mark Pulver
- Unisyn 1.2 Opinions
Mark Pulver
- Advice needed: MIDI router/switchers
Mark Pulver
- modular kit's
Mark Pulver
- 'cheap' used 'scopes? (boat anchors)
Mark Pulver
- Peavey PC-1600 Upgrade
Mark Pulver
- Rack mounting
Mark Pulver
- Asking for inputs
Mark Pulver
- CA3080 filter
Stewart Pye
- SSB
R.Fahl
- Scented ICs
R.Fahl
- Live Gig in Portland, OR, USA
R.Fahl
- New sequencer trix
R.Fahl
- MOSFET replacements?
R.Fahl
- WTD: Buchla 200 User Manual
R.Fahl
- CEM 3340 VCO Question
R.Fahl
- Buchla 242 Pulse Prog. Question
R.Fahl
- Tempco's
Grant Richter
- Buchla 200 User Manual
Grant Richter
- VCO
Grant Richter
- optocouplers for VCAs?
Grant Richter
- VCO
Grant Richter
- VCO
Grant Richter
- EG design
Grant Richter
- VCF design using OTAs
Grant Richter
- VCO
Grant Richter
- Buchla 242 Pulse Prog. Question
Grant Richter
- CEM 3340 VCO Question
Grant Richter
- Fw: Spacerock Festival this weekend
Grant Richter
- EG design
Grant Richter
- AW: Weird Envelopes??? [was
Steve Ridley-MV
- Mail to the UK
Steve Ridley-MV
- Moog ladder filter vs Wah
Steve Ridley-MV
- Re. Akai patchbays
Steve Ridley-MV
- audience participation cont
Steve Ridley-MV
- audience participation II
Steve Ridley-MV
- tubes and synth circuits.
Rob01
- Tube book
Rob01
- tr707 + Drumstation=909??
Rob01
- tr707 mod, need SCHEMATIX!! :)
Rob01
- 303 diy sequencer! :)
Rob01
- Advice needed: MIDI router/switchers
Rob01
- ARP, SH101 FS!
Rob01
- ARP VCF
Thierry Rochebois
- Hot LM13700 ?
Thierry Rochebois
- AW: Hot LM13700 ?
Thierry Rochebois
- Prophet and M12
J.Jacques Roh
- L.E.D.'s
J.Jacques Roh
- MS20
SM
- MS20
SM
- MS20
SM
- ASM1
Bert Schiettecatte
- asm1 + paia midi2cv8?
Bert Schiettecatte
- asm1 + paia midi2cv8?
Bert Schiettecatte
- ARP VCFs...anyone printed them?
Bert Schiettecatte
- Mail to the UK
Paul Schreiber
- Unisyn 1.2 Opinions
Paul Schreiber
- Nailed in the mail.....
Paul Schreiber
- Advice needed: MIDI router/switchers
Paul Schreiber
- Circuits by MK Berry
Paul Schreiber
- Nuts and Volts Magazine
Paul Schreiber
- 13 Dollars for an electronic switch ?? (was: 4066's. Eat em up, Yum)
Paul Schreiber
- Paul & Doug want your synth!
Paul Schreiber
- 8031 keyboard scanner code
Paul Schreiber
- BJ's disk tip
Paul Schreiber
- Change on snail address
Paul Schreiber
- LM324N
Paul Schreiber
- Xpander ECO docs
Paul Schreiber
- Mylar caps
Paul Schreiber
- Scanning keyboards
Paul Schreiber
- Asking for inputs
Paul Schreiber
- analog seq circut
Andrew Schrock
- A few thingies!
Erik Schuijers
- Barry Klein AD generator
Erik Schuijers
- INDEX
Scibona, Joe
- JUNO106 or 60 pitch bender
John R Sepulveda
- SCR VCO?
Synthaholic AKA The Shark
- scented ICs
Synthaholic AKA The Shark
- AW: Ringmod transformers
Synthaholic AKA The Shark
- VCO
Synthaholic AKA The Shark
- VCO
Synthaholic AKA The Shark
- neon-lamp synth in .bmp format
Synthaholic AKA The Shark
- Rack mounting
Troy Sheets
- my new .mp3'ed tracks online...
Troy Sheets
- Unisyn 1.2 Opinions
Skip
- Ringmod transformers
Solenoid
- multiplier chips (was SSB)
Christopher_List at Sonymusic.Com
- VISIO
Christopher_List at Sonymusic.Com
- 'Analog' sequencer on PC?
Christopher_List at Sonymusic.Com
- SSB
John Speth
- Alternative Controllers
John Speth
- Alternative Controllers
John Speth
- 'Analog' sequencer on PC?
John Speth
- Keyboard Mechanical Design
John Speth
- Searching
Anders Sponton
- (no subject)
Anders Sponton
- Siel Cruise
Anders Sponton
- (no subject)
Anders Sponton
- No subject
Anders Sponton
- No subject
Anders Sponton
- (no subject)
Anders Sponton
- Electronote Binders and Tabbed Index
Stephen Punt, Communications, 0171-815 6523
- VCO or VCF
Saul Stokes
- analog seq circut
Saul Stokes
- A digital analog sequencer.
Saul Stokes
- Analogue Sequencers
Saul Stokes
- Analogue Sequencers
Saul Stokes
- Walsh generators?
Ken Stone
- tubes and synth circuits.
Ken Stone
- Walsh Function Primer
Ken Stone
- Superseque Schematics
Ken Stone
- Scented ICs
Ken Stone
- Relays
Ken Stone
- Ringmod transformers
Ken Stone
- Ringmod transformers
Ken Stone
- Keyboard Mechanical Design
Ken Stone
- Keyboard Mechanical Design
Ken Stone
- Scented ICs
Gene & Debby Stopp
- 13 Dollars for an electronic switch ?? (was: 4066's. Eat em up, Yum)
Gene & Debby Stopp
- Mis-labeled resistor in ASM-1 VCO schematic
Gene & Debby Stopp
- Need an update from ASM-1 customers....
Gene & Debby Stopp
- Analogue Sequencers
Gene & Debby Stopp
- Need an update from ASM-1 customers....
Gene & Debby Stopp
- ASM1
Gene & Debby Stopp
- Keyboard Mechanical Design
Gene & Debby Stopp
- Keyboard Mechanical Design
Gene & Debby Stopp
- AW: Power Supplies?
SubtleHintsReflectBiggerThings
- SSM 2033
Charlie T
- MIDI routing AND Circuits by MK Berry
Charlie T
- Keyboard Mechanical Design
Charlie T
- Keyboard Mechanical Design
Charlie T
- Zendrum?
Charlie T
- Barry Klein book
Charlie T
- Our Name In Lights...... (??)
Charlie T
- Starting an ASM-1 Trouble-shooting page.
Roy Tate
- Starting an ASM-1 Trouble-shooting page. [without HTML]
Roy Tate
- Mis-labeled resistor in ASM-1 VCO schematic
Roy Tate
- Unisyn 1.2 Opinions
M Tencza
- EM Mag & Analog
Mark M Tencza
- VCO or VCF
Don Tillman
- fast rectifier
Don Tillman
- linear detuning works !
Don Tillman
- AW: SCR VCO?
Don Tillman
- VCO
Don Tillman
- L.E.D.'s
Karl Helmer Torvmark
- Digisound VCDO
Karl Helmer Torvmark
- AW: Transcendent Polysynth
Peter Ullrich
- 4066's. Eat em up, Yum
Peter Ullrich
- AN1X Mailing list is now operational
Jay Vaughan
- ARP Tech web page
Joachim Verghese
- Hwr, Fwr and more
Wim Verheyen
- fast rectifier
Wim Verheyen
- AR-318 & other AR series modules?
Peter Washburn
- Off topic, KW concert in Karlsruhe.
Anders Wilhelm
- Akai sampler memory
Keith Winstanley
- Keyboard Mechanical Design
Merlin Zener
- Bathroom shelves, was Re: Analogue Sequencers
Merlin Zener
- tubes and synth circuits.
Bob Zimmer
- PCC
Bob Zimmer
- Advice needed: MIDI router/switchers
Bob Zimmer
- Keyboard Mechanical Design
Bob Zimmer
- asm1 + paia midi2cv8?
Bob Zimmer
- Looking for parts
ronkarls at algonet.se
- Not enough time
BDermody at aol.com
- Service info needed for MG-1
Jdbarg at aol.com
- * Kawai K5000s For Sale *
WeAreAs1 at aol.com
- Alternative Controllers
zappa at bellsouth.net
- Virtual VCOs
03sjbrown at bsuvc.bsu.edu
- Q:tek 2MHz scopes
chris
- Roland CSQ-100 Sequencer Schematics
pec at ckshq.com
- Moog ladder filter vs Wah Wah pedal filter
crebble
- Moog ladder filter vs Wah Wah pedal filter
crebble
- Unisyn 1.2 Opinions
The Dark force of dance
- Unisyn 1.2 Opinions
The Dark force of dance
- 4066's. Eat em up, Yum
The Dark force of dance
- 13 Dollars for an electronic switch ?? (was: 4066's. Eat em up, Yum)
The Dark force of dance
- 13 Dollars for an electronic switch ?? (was: 4066's. Eat em up, Yum)
The Dark force of dance
- 13 Dollars for an electronic switch ?? (was: 4066's. Eat em up, Yum)
The Dark force of dance
- More about switching
The Dark force of dance
- 13 Dollars for an electronic switch ?? (was: 4066's. Eat em up, Yum)
The Dark force of dance
- Starting an ASM-1 Trouble-shooting page. [without HTML]
obie12 at earthlink.net
- Not enough time
obie12 at earthlink.net
- tube synth
svetengr at earthlink.net
- Vactrols
svetengr at earthlink.net
- neon-lamp synth in .bmp format
svetengr at earthlink.net
- Alamo - "The One-Stop Music Shop"
music at hkg.com
- Keyboards
jwilmin at hzsbg01.nl.lucent.com
- PCB sizes
jbv
- PCB sizes
jbv
- OSCar
john..
- analogue sequencers
johnine
- Prophet T8
nfad at juno.com
- Keyboard Mechanical Design
DuncanK at kochind.com
- find book
gur milstein
- serge
gur milstein
- No subject
gur milstein
- modular kit's
gur milstein
- MOOG PCB
gur milstein
- 'Analog' sequencer on PC?
gur milstein
- More about switching
Per.Mattsson at mkv.mh.se
- audience participation controls
Per.Mattsson at mkv.mh.se
- Play, Record, Playback and Edit in Real-Time over the Internet
andrewm at newcomm.net
- newbie question: EMS diode ladder
noddle
- Prophet and M12
riccardo
- Yamaha GX-1
riccardo
- ARP
riccardo
- analog seq circut
jmf7001 at thistle.humboldt.edu
- analog seq circut
jmf7001 at thistle.humboldt.edu
- Eric's Tube Synth
jmf7001 at thistle.humboldt.edu
- brand newbie
Darren.Inwood.1 at uni.massey.ac.nz
- newbie's first VCF design. help please!
Darren.Inwood.1 at uni.massey.ac.nz
- optocouplers for VCAs?
mark verbos
Last message date:
Sun Aug 31 23:32:04 CEST 1997
Archived on: Fri Apr 1 13:00:35 CEST 2022
This archive was generated by
Pipermail 0.09 (Mailman edition).