MS20

[SM]

Niklas Lindberg wrote:
> 
> On  1 Sep, Paul Perry wrote:
> > At 01:28 AM 31/08/97 -0700, BJ wrote:
> >>I hope that all people on this list knows that the MS20
> >>dont need any external converters for driving it from a
> >>1V/Oct keboard/MIDI to CV konverter.
> >>All you need is (love) a inverter for the trigger input,
> >>easily made with a transistor!
> >
> > .......technically you are right, BJ, EXCEPT if you want to play in tune....
> > not a feature I personally want or need of course ;)
> >
> > .......actually what you don't need with a MS20 is any convertor at all,
> > since the midi just goes to a module with a fairly pure tone, the audio
> > then goes to MS20 ext audio in, and there are the Hz/V cv and gate for you.
> >
> > paul perry melbourne australia
> >
> I think what BJ was thinking of was the fact that you can control the
> MS20's pitch directly with a V/Oct CV. Just connect it via the
> VCO freq in (and not CV in) and then adjust the tracking with the
> EG1/EXT pot. Value normally between 8.8 and 9.2 :)

> / Niklas

Yes, this vas the case more or less!

BJ