Mis-labeled resistor in ASM-1 VCO schematic

[Gene & Debby Stopp]

Yes, true! Thanks, Roy, for pointing that out. Mark up your schematics, all
you ASM-1 builders, and I'll make the change on my end. The parts stuffing
diagram does show the proper part. I'll have to check the parts list....

- Gene

----------
> From: Roy Tate <roytate at ionet.net>
> To: Synth-DIY <synth-diy at horus.sara.nl>
> Subject: Mis-labeled resistor in ASM-1 VCO schematic
> Date: Wednesday, August 06, 1997 9:52 PM
> 
> There is a small mis-labeled resistor in the exponential converter of 
> the VCO.  At the top of the NPN transistor pair (MAT02 or LM394) is 
> a "150K" resistor to V+.  This is really a 1.5 Meg resistor.  Very 
> minor detail, but this message is for "posterity."  The parts lay-out
> is fine though.
> 
> Cheers,
> 
> Roy Tate
> roytate at ionet.net
> http://www.ionet.net/~roytate